2003 Honda Accord 3.0L V6 | 6-Groove Pulley 105A Alternator | 8296N - PHILTOP

2003 Honda Accord 3.0L V6 | 6-Groove Pulley 105A Alternator | 8296N - PHILTOP

Pulley Grooves: S6

Amperage: 105 A

Built to Last

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6146ANR369DUS

Specifications

Brand
PHILTOP
Pulley Grooves
S6
Amperage
105 A
Rotation Direction
CW
Regulator
IR
Fan Type
IF
Voltage
12 V
Material
Pure Copper Windings, Silicon Steel Laminations, Aluminum Housing
Items Included
1x Alternator 8296N 1x Manual
Warranty Period
2-Year
Part Number
8296N,AL1301X

Highlights

  • Reference Alternators Part Number: 8296, 31100RCAA01, 31100RCAA01RM, 8296N, 90014550, 82968, AL1301X
  • Automotive alternator specifications: Amperage Rating -105Amp,Voltage -12 Volt,Groove Pulley-S6,Rotation-CW,Specs For-,Design-IR/IF,Plug Clock-11
  • Compatibility:2003 Accord 3.0L
  • OEM Standards: Designed to meet rigorous OEM specifications, the PHILTOP Car Alternator is crafted from premium-grade materials and undergoes exhaustive quality testing. Leveraging cutting-edge energy conversion technology, it minimizes power loss to boost fuel efficiency and extend battery lifespan. Its robust construction ensures reliable operation under extreme temperatures, vibrations, and harsh driving conditions, delivering unmatched durability and longevity.
  • Note:If your car has problems like starting difficulty, lack of power, increased fuel consumption, charging system failure, or strange noises, replace the alternator promptly. Before installation, verify your vehicle make, model, year, engine, and OEM part number. Note that the alternator's appearance may differ from your original part, but it is typically fully interchangeable and compatible in function and fitment. If in doubt, send us a photo to confirm; if in doubt, send us a photo to confirm.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20032003
MakeHondaHonda
ModelAccordAccord
TrimEXLX
Engine3.0L V63.0L V6
Note--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Primary Fault Code Analysis

  • P0562-Low system voltage:check the battery, charging output, and connections.
  • P0563-High system voltage:check voltage regulation and grounds.
  • P0620-Generator control circuit fault:check control wiring and connections.
  • P0621-Generator lamp/L terminal circuit fault:check the warning-light circuit.
  • P0622-Generator field/F terminal circuit fault:check the field circuit and connections.
  • P065B-Generator control circuit range/performance:check charging performance and control signals.

Codes alone do not confirm alternator failure. Definitions and diagnostic procedures vary by vehicle.

Checks Before Installation

  • Check fitment: Match the mounting points and electrical connectors to the original alternator.
  • Check the battery: Charge and test the battery before installation.
  • Inspect the drive system: Check the belt, tensioner, wiring, and terminals for wear, damage, or corrosion.

Installation Steps

  • STEP 1 — Park on a level surface, apply the parking brake, and switch off the ignition. Disconnect the negative battery cable.
  • STEP 2 — Photograph the belt routing and wiring connections. Release belt tension and remove the belt from the alternator pulley.
  • STEP 3 — Disconnect the power cable and electrical connectors. Support the alternator and remove its mounting bolts.
  • STEP 4 — Install the new alternator and tighten the mounting bolts to the vehicle manufacturer’s specifications.
  • STEP 5 — Reconnect the wiring and reinstall the belt. Confirm correct belt routing, alignment, and tension before reconnecting the negative battery cable.

After Installation

  • Check that all connections are secure and the belt is seated correctly.
  • Start the engine and confirm the charging warning light turns off.
  • Check charging voltage at the battery against the vehicle manufacturer’s specifications.
  • Switch on the headlights and blower to check charging performance under load. Listen for belt squeal or unusual noise.

Product Video

Product Description

Reviews

4.9/5

Based on 100 reviews

593%
47%
30%
20%
10%

Customer photos and videos

J

02/10/2025

Verified buyer

Worked out great at less than half the price of auto zone.

Christopher burke

10/04/2024

Verified buyer

I don't know how to act now that I can put my window down on my passenger side without having to lean across the truck lol works great

FAQS

PHILTOP New Alternator feature factory-matched cores, stator and rotor are impregnated with insulating varnish. Rigorously tested to OE standards. This ensures secure bonding, stable high-speed operation, durability, and safety.

Easy to install. To ensure safety and correct installation, which varies by vehicle, professional tools are required. Consult our included manual and video guide.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.