2000-2006 Nissan Sentra 1.8L L4 | Aluminum 5/8" Radiator | OE#214106M110/CU2346 - PHILTOP

2000-2006 Nissan Sentra 1.8L L4 | Aluminum 5/8" Radiator | OE#214106M110/CU2346 - PHILTOP

Leak-Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7155CFK1080US

Specifications

Brand
PHILTOP
Transmission Oil Cooler Included
Yes
Engine Oil Cooler Included
No
Core Thickness
5/8 in
Core Width
27-1/16 in
Core Height
14-3/16 in
Radiator Cap Included
No
Inlet Diameter
1-1/8 in
Outlet Diameter
1-1/8 in
Items Included
1x Radiator - CU2346, 1x Instruction Manual
Mounting Type
Pin
Core Material
Aluminium
Radiator Flow Type
Down Flow
Warranty Period
2-Year
OE Number
214106M110,2146061110,214104Z200,214104M700,214606M110,214606M100,214106M100,214604Z000
Part Number
CU2346,2213405,2346C,412346,412327,2346,2852,2327,A2346,NI3010133,431474,8012328,CU2327,KLI2346,NI3010197,REA412346A,432634,SBR2346,PR2346A,RA2346C,BES2346,56090,9847,1981201993,376780231,CRS2346,CUC2346,0R002346A2CM,AM2346,NR2346A,69460,CR2327,CR2346,56091,RA2346,AM2327

Highlights

  • Vehicle Fitment For: 2000-2006 Sentra 1.8L
  • Reference Number: 214106M100, 214604Z000, 214606M100, 214606M110
  • Enhanced Package: Package come with 1x PHILTOP Radiator Complete Radiator and. Fixed foam in four corners for the purpose of fixing the radiator, no bending and no damage.
  • High-Efficiency Cooling: Engineered with a high-density aluminum core and multi-layer cooling fins, ensuring optimal heat dissipation and maintaining the engine's ideal operating temperature.
  • IATF16950 Certification: Authoritative certification, quality assurance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2004 - 20062001 - 20022000 - 20032004 - 20062000 - 2003
MakeNissanNissanNissanNissanNissan
ModelSentraSentraSentraSentraSentra
TrimBaseCAGXESXE
Engine1.8L L41.8L L41.8L L41.8L L41.8L L4
Note
Radiator Cap Is Required
Radiator Cap Is Required
Radiator Cap Is Required
Radiator Cap Is Required
Radiator Cap Is Required

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm fitment: Compare mounting points, hose connections, and oil cooler ports with the original radiator.
  • Inspect components: Check the radiator, hoses, clamps, and seals for damage or leaks.
  • Check coolant: Inspect the coolant level and condition. Flush contaminated coolant before installing the new radiator.

Installation Steps

  • STEP 1 — Let the engine cool completely, then disconnect the negative battery cable. Never open the pressure cap while hot.
  • STEP 2 — Drain the coolant into a suitable container and flush the system as required.
  • STEP 3 — Disconnect hoses, applicable oil cooler lines, and fan wiring. Remove the fan assembly and radiator as required by the vehicle’s service procedure.
  • STEP 4 — Transfer required brackets and accessories. Install the new radiator and tighten fasteners to vehicle specifications.
  • STEP 5 — Reconnect hoses, cooler lines, and electrical connectors. Refill with the specified coolant, bleed trapped air, and fit the correct pressure cap.

After Installation

  • Check hose connections, cooler lines, and the cooling system for leaks.
  • Confirm normal engine temperature and proper cooling fan operation.
  • After the engine cools completely, recheck the coolant level and top up as needed.
  • Recheck for leaks after a short test drive.

Product Video

Product Description

RADIATOR11

Reviews

4.7/5

Based on 9 reviews

567%
433%
30%
20%
10%

Customer photos and videos

Sergio mendozaSergio mendoza

12/27/2025

Verified buyer

Despite my front end being pushed in from a fender bender, I was still able to install this one. It's been a few months already and hasn't had any problems.

Warren L Shannon

02/02/2026

Verified buyer

Fits perfectly

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Many cooling systems require bleeding after refilling to remove trapped air. Follow the procedure specified for the vehicle.

Overheating may also involve low coolant, trapped air, a thermostat, water pump, cooling fan, cap, hose, sensor, or engine condition.