2012-2015 BMW 528i xDrive 2.0L | Front Driver Side CV Axle Shaft | 669760 - PHILTOP

2012-2015 BMW 528i xDrive 2.0L | Front Driver Side CV Axle Shaft | 669760 - PHILTOP

Front Left

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7038SHA6989US

Specifications

Brand
PHILTOP
Position
Front Left
ABS Ring Included
No
Quantity
1
Input Shaft Spline Count
27
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
37
Items Included
1x Front Left Cv Axle Shaft - 66-9760
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
669760

Highlights

  • Fitment: CV Axle Front Left for BMW 535i xDrive 2011-2015, BMW 528i xDrive 2012-2015, BMW 550i xDrive 2011-2016, BMW 650i xDrive 2012 2014-2017, BMW 640i xDrive Gran Coupe 2014-2019, BMW 535d xDrive 2014-2015, BMW 650i xDrive Gran Coupe 2014-2017, BMW Alpina B6 xDrive Gran Coupe 2015-2018, BMW 640i xDrive 2014-2018.
  • Reference Number: APCVA1101,31607618681, 669760, 66-9760, NCV27045.
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV axles. The high quality materials and excellent performance of our half shafts provide reliable support for your vehicle!
  • High Quality: Half shafts are 100% ground to improve ball path and surface finish and extend product life.CV shafts are normalised to ensure stability in subsequent machining.
  • Function: Half shafts for equal speed power transmission and wheel steering through pendulum angle.CV axles are designed in strict accordance with OE standards, with 100% inspection of key mating dimensions.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20152014 - 20152011 - 20152011 - 20162014 - 20182014 - 201920122014 - 20172014 - 20172015 - 2018
MakeBMWBMWBMWBMWBMWBMWBMWBMWBMWBMW
Model528i xDrive535d xDrive535i xDrive550i xDrive640i xDrive640i xDrive Gran Coupe650i xDrive650i xDrive650i xDrive Gran CoupeAlpina B6 xDrive Gran Coupe
TrimBaseBaseBaseBaseBaseBaseBaseBaseBaseBase
Engine2.0L L43.0L L63.0L L64.4L V83.0L L63.0L L64.4L V84.4L V84.4L V84.4L V8
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.7/5

Based on 10 reviews

580%
410%
310%
20%
10%

Lydia

09/28/2026

Verified buyer

Item was as described and they fit my vehicle

h2oman

09/01/2026

Verified buyer

So far so good. Great price.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.