2003-2018 Toyota Corolla 1.8L | Front Passenger Side CV Axle | 665224 - PHILTOP

2003-2018 Toyota Corolla 1.8L | Front Passenger Side CV Axle | 665224 - PHILTOP

Front Right

Built to Last

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8309SHA5962US

Specifications

Brand
PHILTOP
Position
Front Right
ABS Ring Included
Yes
Quantity
1
Input Shaft Spline Count
20
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
26
Items Included
1x Front Right Cv Axle Shaft - 66-5224
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
665224

Highlights

  • Fitment: CV Axle Front Right for 2014-2018 Corolla 1.8L(Trans:Automatic) CVT/Manual 6/N/R-speed, 2003-2013 Corolla 1.8L Manual 5-speed, Matrix 1.8L FWD Manual 5-speed, 2009-2016 Corolla 1.8L(Trans:Automatic)4-speed, 2003-2010 Vibe 1.8L FWD Manual 5-speed, 2009-2013 Matrix 1.8L FWD(Trans:Automatic) 4-speed, 2009-2010 Vibe 1.8L FWD(Trans:Automatic) 4/5-speed.
  • Reference Number: 4341001130, 4341002310, 4341002A02, 4341002A00, 4341002A03, 66-5224,19183737, 19204984, 4341001131, 4341002290,Compatible with Toyota/Pontiac, NCV69588, 19204706, 4341002760, 4341002280,APCVA677MF, 4341002A01, 665224.
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV axles. The high quality materials and excellent performance of our half shafts provide reliable support for your vehicle!
  • High Quality: Half shafts are 100% ground to improve ball path and surface finish and extend product life.CV shafts are normalised to ensure stability in subsequent machining.
  • Function: Half shafts for equal speed power transmission and wheel steering through pendulum angle.CV axles are designed in strict accordance with OE standards, with 100% inspection of key mating dimensions.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 201020172009 - 20112003 - 20082012 - 20182003 - 20182014 - 201820142003 - 20162017 - 201820162009 - 20102017 - 20182017 - 20182003 - 20082009 - 20132003 - 2008
MakePontiacToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelVibeCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaCorollaMatrixMatrixMatrix
TrimBase50th Anniversary Special EditionBaseCELLELE EcoLe Eco PlusSSESpecial EditionXLEXLEXSEBaseBaseXR
Engine1.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L4
Note---------------
Before 10/2012
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.9/5

Based on 7 reviews

586%
414%
30%
20%
10%

Adrian Stacul

10/26/2025

Verified buyer

You can feel the heft and quality of this drive shaft. The materials feel premium, and the construction is solid. Great purchase

Aman

08/05/2025

Verified buyer

Good

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.