2005-2009 Hyundai Tucson 2.0L | 2 PC Front Brake Caliper w/Bracket w/Hanger | 19B2997 - PHILTOP

2005-2009 Hyundai Tucson 2.0L | 2 PC Front Brake Caliper w/Bracket w/Hanger | 19B2997 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8007DBC1064US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
2
Position
Front
Color
Silver
Items Included
1x Front Right Caliper - 19B2997 1x Front Left Caliper - 19B2996
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
2.36 in
Warranty Period
2-Year
Part Number
19B2997,19B2996

Highlights

  • [Vehicle Compatibility] The Front brake caliper fit for the following models: 2005-2010 Kia Sportage, 2005-2009 Hyundai Tucson
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 19-B2997, 19-B2996, 19B2997, 19B2996, 192997, 192996, 581302E500, 581902EA10, 581902EA00, 581012EA21, 581012EA20
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Good Quality] The quality and production process are certified by IATF17243. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20062007 - 20092005 - 200620052008 - 20092006 - 20092007 - 20092005 - 20102005 - 20102005 - 2010
MakeHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiHyundaiKiaKiaKia
ModelTucsonTucsonTucsonTucsonTucsonTucsonTucsonSportageSportageSportage
TrimGLGLSGLSLXLimitedLimitedSEEXLXLX
Engine2.0L L42.0L L42.7L V62.7L V62.0L L42.7L V62.7L V62.7L V62.0L L42.7L V6
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Ramon Montano

12/11/2025

Verified buyer

Good

Martin

07/08/2024

Verified buyer

Good product fit perfectly all parts included Clips and Crush washers

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Always use new sealing washers on the banjo bolt; never reuse the old ones.The hose may be reusable if it is the correct type and shows no cracks, swelling, leakage, damaged fittings, or internal restriction. Replace it if its condition is uncertain.

Inspect the slide pins, piston movement, brake hose, pad fit, parking-brake mechanism, and hydraulic pressure. Several components can cause brake drag.