2003-2017 Honda Accord 2.4L/3.0L | 1 PC Front Left Brake Caliper w/Bracket w/Hanger | 19B2660 - PHILTOP

2003-2017 Honda Accord 2.4L/3.0L | 1 PC Front Left Brake Caliper w/Bracket w/Hanger | 19B2660 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1509DBC440LUS

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Front, Left
Color
Silver
Items Included
1x Front Left Caliper - 19B2660
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
2.25 in
Warranty Period
2-Year
Part Number
19B2660

Highlights

  • APPLICABLE MODELS - 2013-2021 Civic, 2003-2017 Accord, 2013-2015 ILX, 2016-2016 CRZ, 2013-2014 Fit
  • SPECIFICATION - Position: Front Left Caliper. Exhaust port size: M10x1.0. Inlet port size: 0.39. Mounting hardware included: Yes. Piston material: Steel. Number of pistons: 1. Piston outer diameter: 2.25
  • INTERCHANGE NUMBER - 19-B2660, 19B2660, 192660, 45018SDCA00, 45018SDCA01, 45019SDAA01, 45019SDAA02, 45019SZW000, 45019T2FA00, 45019TA0A00, 45019TA5A00, 45019TEAT00
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20152003 - 20052003 - 2007200720052003 - 201720062008 - 20122008 - 20102014 - 201520052011 - 201220072006 - 20072016201620162017 - 20212013 - 20152016 - 20182016 - 20212013 - 20152016 - 20182017 - 20212014 - 20152016 - 20212016 - 201820152017 - 20212019 - 20212017 - 20212016 - 20212013 - 2014
MakeAcuraHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHondaHonda
ModelILXAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordAccordCR-ZCR-ZCR-ZCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicCivicFit
TrimBaseDXEXEX-LHybridLXLX Special EditionLX-PLX-SLX-SSESESpecial EditionValue PackageEXEX-LLXEXEXEXEX-LEX-LEX-TLXLXLXLX-PSESportSportSport TouringTouringEV
Engine2.0L L42.4L L42.4L L42.4L L43.0L V62.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L42.4L L41.5L L41.5L L41.5L L41.5L L41.8L L42.0L L41.5L L41.8L L41.5L L41.5L L41.8L L42.0L L42.0L L41.8L L41.5L L42.0L L41.5L L41.5L L4-
Note---------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

john marshall

11/07/2025

Verified buyer

This part was delivered quick and on time, it fit perfectly just like they said it would.. I am 100% satisfied with this buy.

Lisa_CivicDriver_160

10/05/2025

Super easy to install, bolted right up. The shipping was incredibly fast too, got it the next day! Couldn't be happier with the whole process.

FAQS

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.

A single caliper may be replaced when only one side has failed, but the opposite caliper, pads, rotors, hoses, and slide components should also be inspected for uneven operation or wear.

Use only the brake fluid specification listed by the vehicle manufacturer. Avoid mixing fluids unless the vehicle information confirms compatibility.