2000-2006 Toyota Tundra 3.4L V6 | 1 PC Front Left Brake Caliper w/Hanger | 192712 - PHILTOP

2000-2006 Toyota Tundra 3.4L V6 | 1 PC Front Left Brake Caliper w/Hanger | 192712 - PHILTOP

Hanger Included

4-Piston Design

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6100DBC145CUS

Specifications

Brand
PHILTOP
Piston Count
4
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M7x1.0
Bracket Included
No
Mounting Hardware Included
Yes
Quantity
1
Position
Front, Left
Color
Silver
Items Included
1x Front Left Caliper - 192712
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.78 in
Warranty Period
2-Year
Part Number
192712

Highlights

  • APPLICABLE MODELS - 2000-2006 Tundra Front Left, 2001-2007 Sequoia Front Left, 2003-2005 4Runner Front Right
  • INTERCHANGE NUMBER - 19-2712, 192712, 192712, 477500C020, 477500C022, 477500C021, 4775035160, 0446535250, 0446535290, T00633281, 1927128
  • SPECIFICATION - Position: Front Left Caliper. Exhaust port size: M7x1.0. Inlet port size: M10x1.0. Mounting hardware included: Yes. Piston material: Steel. Number of pistons: 4. Piston outer diameter: 1.78 in
  • DURABLE - PHILTOP brake calipers are galvanized and undergo multiple tests to ensure the life of their parts
  • TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2001 - 20072001 - 20072000 - 20042005 - 20062005 - 20062000 - 20062000 - 20042005 - 20062000 - 2006
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelSequoiaSequoiaTundraTundraTundraTundraTundraTundraTundra
TrimLimitedSR5BaseBaseBaseLimitedSR5SR5SR5
Engine4.7L V84.7L V83.4L V64.0L V64.7L V84.7L V83.4L V64.0L V64.7L V8
Note
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

Reviews

5.0/5

Based on 6 reviews

5100%
40%
30%
20%
10%

Lazaro Molina Carbo

03/30/2026

Verified buyer

Satisfecho con el producto

David E.

08/31/2024

Verified buyer

Worked as it was supposed to on 2006 Sequoia. Hopefully it will last.

FAQS

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.

Inspect the slide pins, piston movement, brake hose, pad fit, parking-brake mechanism, and hydraulic pressure. Several components can cause brake drag.

Many electronic parking-brake systems require a service mode before the rear caliper is removed or the piston is retracted. Follow the vehicle-specific procedure.