2003-2008 Toyota Corolla 1.8L | 1 PC Front Left Brake Caliper w/Bracket w/Hanger | OE#88970137/19B2698 - PHILTOP

2003-2008 Toyota Corolla 1.8L | 1 PC Front Left Brake Caliper w/Bracket w/Hanger | OE#88970137/19B2698 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8391DBC0718US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M7x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Front, Left
Color
Silver
Items Included
1x Front Left Caliper - 19B2698
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
2.25 in
Warranty Period
2-Year
OE Number
88970137,4775002140
Part Number
19B2698

Highlights

  • APPLICABLE MODELS - 2003-2008 Corolla, 2003-2008 Matrix, 2003-2008 Vibe
  • INTERCHANGE NUMBER - 19-B2698, 19B2698, 192698, 88970137, 88975879, 88971138, 4775002140, 4772102141, 4772102140, 88972092, 88972096, 0446502070, 0446502080
  • SPECIFICATION - Position: Front Left Caliper. Exhaust port size: M7x1.0. Inlet port size: M10x1.0. Mounting hardware included: Yes. Piston material: Steel. Number of pistons: 1. Piston outer diameter: 2.25 in
  • DURABLE - PHILTOP brake calipers are galvanized and undergo multiple tests to ensure the life of their parts
  • TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20082003 - 20062003 - 20082003 - 20082003 - 20082005 - 20062003 - 20082003 - 20082003 - 2006
MakePontiacPontiacToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelVibeVibeCorollaCorollaCorollaCorollaMatrixMatrixMatrix
TrimBaseGTCELESXRSBaseXRXRS
Engine1.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L41.8L L4
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

jeni

01/25/2025

Verified buyer

Direct replacement on 2003 Toyota Corolla. Good quality at a great price. Installation was easy. Looks good and fit perfectly. Going to buy one for the other side

Rob_HomeGarage_815

02/10/2026

This caliper is solid. Feels robust and well-made. Definitely a good quality part for the price point.

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.