2005-2014 Ford Mustang 3.7L/4.0L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B4926 - PHILTOP

2005-2014 Ford Mustang 3.7L/4.0L | 2 PC Rear Brake Caliper w/Bracket w/Hanger | 18B4926 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1950DBC0789US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.5
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
2
Position
Rear
Color
Silver
Items Included
1x Rear Right Caliper - 18B4927 1x Rear Left Caliper - 18B4926
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.68 in
Warranty Period
2-Year
Part Number
18B4926,18B4927

Highlights

  • [Vehicle Compatibility] The Rear brake caliper fit for the following models: 2005-2014 Ford Mustang
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 18-B4927, 18-B4926, 18B4927, 18B4926, 184927, 184926, 5R3Z2552AA, 8R3Z2552AA, 7R3Z2552A, CR3Z2552B, CR3Z2552C, DR3Z2552A, 8R3Z2552A, DR3Z2552C, DR3Z2552B
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20142005 - 20102012 - 20132008 - 20092005 - 20102011 - 20142007 - 20082007 - 20122013 - 20142008 - 2009
MakeFordFordFordFordFordFordFordFordFordFord
ModelMustangMustangMustangMustangMustangMustangMustangMustangMustangMustang
TrimBaseBaseBoss 302BullittGTGTShelby GTShelby GT500Shelby GT500Shelby GT500KR
Engine3.7L V64.0L V65.0L V84.6L V84.6L V85.0L V84.6L V85.4L V85.8L V85.4L V8
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.8/5

Based on 8 reviews

575%
425%
30%
20%
10%

MOONYI JIN

01/25/2025

Verified buyer

Identical to OEM! Easy install Been running them for about three months now. No issues at all very smooth will buy a set for the front!

Fit perfect didn't have to drill one hole everything lined up it was awesome I would buy a hundred more of these

01/21/2025

Verified buyer

Perfect fit

FAQS

Inspect the slide pins, piston movement, brake hose, pad fit, parking-brake mechanism, and hydraulic pressure. Several components can cause brake drag.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Always use new sealing washers on the banjo bolt; never reuse the old ones.The hose may be reusable if it is the correct type and shows no cracks, swelling, leakage, damaged fittings, or internal restriction. Replace it if its condition is uncertain.