2005-2012 Nissan Pathfinder 4.0L V6 | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B2994A - PHILTOP

2005-2012 Nissan Pathfinder 4.0L V6 | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B2994A - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3145DBC199CUS

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Rear, Left
Color
Silver
Items Included
1x Rear Left Caliper - 19B2994A
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.50 in
Warranty Period
2-Year
Part Number
19B2994A

Highlights

  • [Vehicle Compatibility] The Rear Left brake caliper fit for the following models: 2005-2012 Nissan Pathfinder
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 19-B2994A, 19B2994A, 192994A, 44011ZL00A
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Good Quality] The quality and production process are certified by IATF16967. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20122008 - 20122006 - 20122005 - 201020082005 - 20092011 - 20122011 - 20122005
MakeNissanNissanNissanNissanNissanNissanNissanNissanNissan
ModelPathfinderPathfinderPathfinderPathfinderPathfinderPathfinderPathfinderPathfinderPathfinder
TrimLELESSESESE Off-RoadSVSilver EditionXE
Engine4.0L V65.6L V84.0L V64.0L V65.6L V84.0L V64.0L V64.0L V64.0L V6
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Rob_HomeGarage_760

04/07/2026

Got this for my Pathfinder and it was super easy to put on. The shipping was lightning fast too, arrived way sooner than I thought it would. Definitely recommend this seller.

Ashley_RoadTrip_146

04/11/2026

The old caliper was completely shot, and this new one fixed the issue right up. Installation required a few extra tools I don't normally keep around, but luckily I had them in my garage. Much better braking now.

FAQS

Inspect the slide pins, piston movement, brake hose, pad fit, parking-brake mechanism, and hydraulic pressure. Several components can cause brake drag.

Many electronic parking-brake systems require a service mode before the rear caliper is removed or the piston is retracted. Follow the vehicle-specific procedure.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.