2016-2024 Mazda CX-5 2.5L | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B7431 - PHILTOP

2016-2024 Mazda CX-5 2.5L | 1 PC Rear Left Brake Caliper w/Bracket w/Hanger | 19B7431 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6216DBC4395US

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Rear, Left
Color
Silver
Items Included
1x Rear Left Caliper - 19B7431
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.50 in
Warranty Period
2-Year
Part Number
19B7431

Highlights

  • APPLICABLE MODELS - 2016-2023 CX-5
  • INTERCHANGE NUMBER - 19-B7431, 19B7431, 197431, KAY02671XA
  • SPECIFICATION - Position: Rear Left Caliper. Exhaust port size: M10x1.0. Inlet port size: M10x1.0. Mounting hardware included: Yes. Piston material: Steel. Number of pistons: 1. Piston outer diameter: 1.5 in
  • DURABLE - PHILTOP brake calipers are galvanized and undergo multiple tests to ensure the life of their parts
  • TIPS - Please enter your vehicle information in the upper left corner of the page. Check the accessory location information and vehicle compatibility information.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2022 - 20242022 - 20242022 - 20242022 - 20242021202120172016 - 20212019 - 202120192019 - 202120162016 - 20212016 - 2021
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
ModelCX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5
Trim2.5 S2.5 S Carbon Edition2.5 Turbo2.5 Turbo SignatureCarbon EditionCarbon Edition TurboGrand SelectGrand TouringGrand Touring ReserveSignatureSignatureSportSportTouring
Engine2.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.2L L42.5L L42.0L L42.5L L42.5L L4
Note
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston
Installation Hardware Included;Supplied with Mounting Bracket;with Metal Piston

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

Reviews

4.8/5

Based on 45 reviews

587%
411%
32%
20%
10%

Customer photos and videos

Travis Smith

08/02/2026

Verified buyer

I haven’t installed it yet I will tomorrow and I’ll update my review but the machining and the casting on it is probably nicer than the oem.

Casey W.

08/28/2026

Verified buyer

Works 👍

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Use only the brake fluid specification listed by the vehicle manufacturer. Avoid mixing fluids unless the vehicle information confirms compatibility.

Opening a hydraulic brake line normally introduces air, so the system should be bled according to the vehicle service procedure. Some vehicles may require a scan tool for part of the process.