2000-2003 Buick LeSabre 3.8L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M630040 - PHILTOP

2000-2003 Buick LeSabre 3.8L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M630040 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8847BMC061CUS

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M14 X 1.5
Reservoir Included
Yes
Secondary Outlet Thread Size
M14 X 1.5
Sensor Included
Yes
Items Included
1x Master Cylinder - M630040
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630040

Highlights

  • [Vehicle Fitment]: PHILTOP Brake Master Cylinder Compatible with Buick LeSabre 2000-2003, Cadillac DeVille 2000-2001, Pontiac Bonneville 2000-2003, Aurora 2001-2003.
  • [Reference Number]: PHILTOP Brake Master Cylinder Assembly Replacement for: M630040;18040242;18045192;18047787.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Specifications]: ①Condition: New; ②Reservoir Included: Yes; ③Material: ZL101A Aluminum; ④Master Cylinder Bore Diameter: 1(IN); ⑤Number of Outlets: 2; ⑥Rearward Outlet Size: M14 x 1.5; ⑦Sensor Included: Yes.
  • [Specifications]: ①Condition: New; ②Reservoir Included: Yes; ③Material: ZL101A Aluminum; ④Master Cylinder Bore Diameter: 1(IN); ⑤Number of Outlets: 2; ⑥Rearward Outlet Size: M14 x 1.5; ⑦Sensor Included: Yes.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2000 - 20032000 - 20032000 - 20012000 - 20012000 - 20012001 - 20022001 - 20032000 - 20032000 - 20032000 - 2003
MakeBuickBuickCadillacCadillacCadillacOldsmobileOldsmobilePontiacPontiacPontiac
ModelLeSabreLeSabreDeVilleDeVilleDeVilleAuroraAuroraBonnevilleBonnevilleBonneville
TrimCustomLimitedBaseDHSDTSBaseBaseSESLESSEi
Engine3.8L V63.8L V64.6L V84.6L V84.6L V83.5L V64.0L V83.8L V63.8L V63.8L V6
Note
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.;Exc. Heavy Duty Brakes
Bore: 1 In.;Exc. Heavy Duty Brakes
Bore: 1 In.;Exc. Heavy Duty Brakes
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

11

Reviews

4.6/5

Based on 5 reviews

560%
440%
30%
20%
10%

Carlos Gouveia

02/06/2026

Verified buyer

100%

CarGuy_John_674

11/19/2025

This part looks and feels like a quality piece. For the price, it's a steal. My brakes feel firm and reliable again, way better than the worn-out original.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Remaining air, an external leak, incorrect pushrod clearance, flexible hose expansion, caliper issues, or an ABS bleeding requirement may contribute to a soft pedal.

Port location and thread size can vary between applications that otherwise look similar. Compare the new unit with the original and do not force or reshape lines unless the service procedure allows it.