2001-2006 BMW X5 3.0L L6/4.4L V8/4.6L V8/4.8L V8 | 0.87 in Brake Master Cylinder w/o Sensor | M630077 - PHILTOP

2001-2006 BMW X5 3.0L L6/4.4L V8/4.6L V8/4.8L V8 | 0.87 in Brake Master Cylinder w/o Sensor | M630077 - PHILTOP

Sensor Not Included

Leak-Resistant Seal

4.2

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4807BMC084LUS

Specifications

Brand
PHILTOP
Bore Diameter
0.87 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
No
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
No
Items Included
1x Master Cylinder - M630077
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630077

Highlights

  • (FITMENT)This brake master cylinder compatible with X5 2001-2006.
  • (Specifications) Material: Aluminum; Master Cylinder Bore Diameter: - inch/-mm; Number of Outlets: 2; Rearward Outlet Size: M12 x 1.0; Reservoir Included: No; Sensor Included: No; Mounting Hardware Included: No.
  • (OE REPLACEMENT NUMBER)This brake master cylinder OE part number#: M630077;13-3167;34316757743.
  • (100% NEW AND PRECISE REPLACEMENT)This brake master cylinder is made from brand new materials and is not a remanufactured product to ensure high quality and safety; the cylinder housing is constructed to match the casting material of the original part to ensure fitment to your car.
  • (SAE INTERNATIONAL STANDARDS)All rubber parts of this brake master cylinder are made of high-quality EPDM composite material, which is resistant to glycol brake fluid corrosion and meets stringent SAE International standards.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20012002 - 200620012002 - 20062002 - 20032004 - 2006
MakeBMWBMWBMWBMWBMWBMW
ModelX5X5X5X5X5X5
Trim3.0i3.0i4.4i4.4i4.6is4.8is
Engine3.0L L63.0L L64.4L V84.4L V84.6L V84.8L V8
Note
Bore: 22 mm and 25 mm;From 09/2001
Bore: 22 mm and 25 mm
Bore: 22 mm and 25 mm;From 09/2001
Bore: 22 mm and 25 mm
Bore: 22 mm and 25 mm
Bore: 22 mm and 25 mm

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

Reviews

4.2/5

Based on 5 reviews

540%
440%
320%
20%
10%

Amanda_MomOfThree_293

02/18/2026

My X5's brakes were feeling weak, but this master cylinder was a game-changer. The pedal is firm and responsive again, making me feel confident on the road. A solid fix for a common problem.

Rob_HomeGarage_490

02/06/2026

Super impressed with how quickly this got here and how easy it was to install on my X5. Fit perfectly and the brakes are working great. Couldn't ask for more.

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

It may be possible when the design matches and the reservoir is undamaged. Use suitable new seals where required and inspect the connection for leaks.

Remaining air, an external leak, incorrect pushrod clearance, flexible hose expansion, caliper issues, or an ABS bleeding requirement may contribute to a soft pedal.