2007-2012 Dodge Caliber 2.0L L4/2.4L L4/1.8L L4 | 0.813 in Brake Master Cylinder w/o Sensor | M630515 - PHILTOP

2007-2012 Dodge Caliber 2.0L L4/2.4L L4/1.8L L4 | 0.813 in Brake Master Cylinder w/o Sensor | M630515 - PHILTOP

Sensor Not Included

Leak-Resistant Seal

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8022BMC250HUS

Specifications

Brand
PHILTOP
Bore Diameter
0.813 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
No
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
No
Items Included
1x Master Cylinder - M630515
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630515

Highlights

  • [FITMENT]: This Aluminium brake master cylinder with NO reversior replacement for 2014-2018 Jeep Compass, 2012 2014-2017 Jeep Patriot, 2007 Dodge Caliber 2.0L L 4.
  • [OE NUMBER]: This PHILTOP Aluminium brake master cylinder with NO reversior replaces OE#: M630515, 5175093AA, 5175093AB.
  • [SPECIFICATION]: Package Includes: 1x Master Cylinder - M630515, Reservoir Included: No, Sensor Included: No, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M12 X 1.0, Secondary Outlet Thread Diameter: M12 X 1.0, Master Cylinder Bore Diameter: 0.813 in.
  • [PRECISE REPLACEMENT]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [ALL CLIMATE RELIABLE]: Built for real-world extremes, it delivers dependable braking whether on a freezing -40℃ morning or during demanding drives in 150℃ engine heat, eliminating performance fade and cold-start issues.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 201120112007 - 20102010 - 20112007 - 20092007 - 200920122007 - 20092007 - 2010201220122010 - 20112010 - 2011201620152011201120152011 - 201620172011 - 20162017 - 20182007 - 20152017 - 20182007 - 20102012 - 201620172007 - 20102012 - 20162017 - 20182017 - 201820162011 - 201620172011 - 2016201720112007 - 20102012 - 20152007 - 201620172007 - 20162017
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCaliberCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassCompassPatriotPatriotPatriotPatriotPatriotPatriotPatriotPatriotPatriotPatriotPatriotPatriot
TrimHeatMainstreetR/TRushSESESESXTSXTSXTSXT PlusUptownUptown75th AnniversaryAltitudeBaseBaseHigh AltitudeLatitudeLatitudeLatitudeLatitudeLimitedLimitedSportSportSportSportSportSportTrailhawk75th AnniversaryLatitudeLatitudeLatitudeLatitudeLatitude XLimitedLimitedSportSportSportSport
Engine2.0L L42.0L L42.4L L42.4L L41.8L L42.0L L42.0L L41.8L L42.0L L42.0L L42.0L L42.0L L42.4L L42.4L L42.4L L42.0L L42.4L L42.4L L42.0L L42.0L L42.4L L42.4L L42.4L L42.4L L42.0L L42.0L L42.0L L42.4L L42.4L L42.4L L42.4L L42.4L L42.0L L42.0L L42.4L L42.4L L42.4L L42.4L L42.4L L42.0L L42.0L L42.4L L42.4L L4
Note
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
-
Bore: 13/16 In.
-
Bore: 13/16 In.
-
Bore: 13/16 In.
Bore: 13/16 In.
-
Bore: 13/16 In.
Bore: 13/16 In.
--
Bore: 13/16 In.
Bore: 13/16 In.
-
Bore: 13/16 In.
-
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
-
Bore: 13/16 In.
-

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.8/5

Based on 6 reviews

583%
417%
30%
20%
10%

Emma_DailyCommute_270

01/12/2026

Solid construction, feels very durable. For the price point, the craftsmanship is impressive. It's a good, reliable part that won't break the bank.

Jason_Trucks_385

10/18/2025

Installation was straightforward, and the delivery was quicker than I anticipated. It's always a relief when a part fits perfectly and shows up on time.

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.