2013-2024 Mazda CX-5 2.5L L4 | 0.813 in Brake Master Cylinder w/o Sensor | M631033 - PHILTOP

2013-2024 Mazda CX-5 2.5L L4 | 0.813 in Brake Master Cylinder w/o Sensor | M631033 - PHILTOP

Sensor Not Included

Leak-Resistant Seal

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1048BMC082XUS

Specifications

Brand
PHILTOP
Bore Diameter
0.813 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
No
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
No
Items Included
1x Master Cylinder - M631033
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M631033

Highlights

  • [FITMENT]: This Aluminium brake master cylinder with NO reversior replacement for 2013-2018 Mazda CX-5.
  • [OE NUMBER]: This PHILTOP Aluminium brake master cylinder with NO reversior replaces OE#: M631033, KDY44340ZA, KDY34340ZA.
  • [SPECIFICATION]: Package Includes: 1x Master Cylinder - M631033, Reservoir Included: No, Sensor Included: No, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M12 X 1.0, Secondary Outlet Thread Diameter: M12 X 1.0, Master Cylinder Bore Diameter: 0.813 in.
  • [PRECISE REPLACEMENT]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [ALL CLIMATE RELIABLE]: Built for real-world extremes, it delivers dependable braking whether on a freezing -40℃ morning or during demanding drives in 150℃ engine heat, eliminating performance fade and cold-start issues.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2022 - 20242022 - 20242022 - 20242022 - 202420212021201720132014 - 20212019 - 202120192019 - 20212013 - 20162015 - 202120132014 - 2021
MakeMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazdaMazda
ModelCX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5CX-5
Trim2.5 S2.5 S Carbon Edition2.5 Turbo2.5 Turbo SignatureCarbon EditionCarbon Edition TurboGrand SelectGrand TouringGrand TouringGrand Touring ReserveSignatureSignatureSportSportTouringTouring
Engine2.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.5L L42.0L L42.5L L42.5L L42.2L L42.5L L42.0L L42.5L L42.0L L42.5L L4
Note----------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.7/5

Based on 6 reviews

567%
433%
30%
20%
10%

AutoMom_2019_424

02/19/2026

My CX-5 was pulling to one side, and this new master cylinder fixed that right up. The braking is balanced and strong now. Feels much safer to drive.

Mike from Texas_99

02/04/2026

Really impressed with the build quality for this price point. It feels solid and well-constructed. My Mazda CX-5 stops much better now. Definitely a good value.

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.