2009 Ford F-150 5.4L/4.6L | 1.125 in Brake Master Cylinder w/Reservoir w/Sensor | M630528 - PHILTOP

2009 Ford F-150 5.4L/4.6L | 1.125 in Brake Master Cylinder w/Reservoir w/Sensor | M630528 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4646BMC0521US

Specifications

Brand
PHILTOP
Bore Diameter
1.125 in
Outlet Count
2
Rearward Outlet Size
M14 X 1.5
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630528
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630528

Highlights

  • (FITMENT)This brake master cylinder compatible with F-150 2009, Lobo 2009.
  • (Specifications) Material: Aluminum; Master Cylinder Bore Diameter: 1.125 inch/28.575mm; Number of Outlets: 2; Rearward Outlet Size: M14 x 1.5; Reservoir Included: Yes; Sensor Included: Yes; Mounting Hardware Included: No.
  • (OE REPLACEMENT NUMBER)This brake master cylinder OE part number#: M630528;134203;9L3Z-2140-F.
  • (100% NEW AND PRECISE REPLACEMENT)This brake master cylinder is made from brand new materials and is not a remanufactured product to ensure high quality and safety; the cylinder housing is constructed to match the casting material of the original part to ensure fitment to your car.
  • (SAE INTERNATIONAL STANDARDS)All rubber parts of this brake master cylinder are made of high-quality EPDM composite material, which is resistant to glycol brake fluid corrosion and meets stringent SAE International standards.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200920092009200920092009200920092009
MakeFordFordFordFordFordFordFordFordFord
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150
TrimFX4King RanchLariatPlatinumSTXXLXLXLTXLT
Engine5.4L V85.4L V85.4L V85.4L V84.6L V84.6L V85.4L V84.6L V85.4L V8
Note
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.
Bore: 1.125 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Mike from Texas_923

02/05/2026

Super quick shipping, got here faster than I expected. The installation was surprisingly simple, I'm not a mechanic but I managed it with no issues. Great service.

Emma_DailyCommute_325

12/29/2025

The quality of this master cylinder is really impressive for the price. It looks and feels like a high-end part. My brakes feel solid and reliable now, great value.

FAQS

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Before driving, press the brake pedal firmly several times until it feels firm, to seat the pads against the rotor.Confirm secure fittings, correct fluid level, no leakage, a stable pedal, normal warning-light status, and proper brake response before normal driving.

Possible signs include a pedal that slowly sinks, inconsistent pedal feel, fluid leakage, or difficulty building hydraulic pressure. Air, external leaks, and other brake components can cause similar symptoms.