2005-2006 Chevrolet Equinox 3.4L | 1 in Brake Master Cylinder w/Sensor w/Reservoir | M630327 - PHILTOP

2005-2006 Chevrolet Equinox 3.4L | 1 in Brake Master Cylinder w/Sensor w/Reservoir | M630327 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1971BMC0745US

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630327
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630327

Highlights

  • (FITMENT)This brake master cylinder compatible with Vue 2003-2007, Equinox 2005-2006, Torrent 2006.
  • (Specifications) Material: Aluminum; Master Cyl inder Bore Diameter: 1inch/25.4mm; Number of Outlets: 2; Rearward Outlet Size: M10 x 1.0; Reservoir Included: Yes; Sensor Included: Yes; Mounting Hardware Included: No.
  • (OE REPLACEMENT NUMBER)This brake master cylinder OE part number#: M630327;13-3102;22707377.
  • (100% NEW AND PRECISE REPLACEMENT)This brake master cylinder is made from brand new materials and is not a remanufactured product to ensure high quality and safety; the cylinder housing is constructed to match the casting material of the original part to ensure fitment to your car.
  • (SAE INTERNATIONAL STANDARDS)All rubber parts of this brake master cylinder are made of high-quality EPDM composite material, which is resistant to glycol brake fluid corrosion and meets stringent SAE International standards.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20062005 - 2006200620032004 - 200720032004 - 200720072004 - 2007
MakeChevroletChevroletPontiacSaturnSaturnSaturnSaturnSaturnSaturn
ModelEquinoxEquinoxTorrentVueVueVueVueVueVue
TrimLSLTBaseBaseBaseBaseBaseGreen LineRed Line
Engine3.4L V63.4L V63.4L V62.2L L42.2L L43.0L V63.5L V62.4L L43.5L V6
Note
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.;From VIN 3S823795
Bore: 1 In.
Bore: 1 In.;From VIN 3S823795
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

Vonda

04/05/2026

Verified buyer

Very Good product my husband had no problems with it and the price was also good .

Rob_HomeGarage_587

03/09/2026

This master cylinder cap feels really sturdy and well-made. It's a small part, but it fits snugly and seems like it'll last. Good quality for the price.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

The system normally requires bleeding after the hydraulic lines are opened. The correct sequence and method vary by vehicle, and some ABS systems may require a scan tool.