1995-2000 Toyota Tacoma 2.4L/2.7L/3.4L | 1 in Brake Master Cylinder w/Sensor w/Reservoir | M390285 - PHILTOP

1995-2000 Toyota Tacoma 2.4L/2.7L/3.4L | 1 in Brake Master Cylinder w/Sensor w/Reservoir | M390285 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1552BMC098UUS

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M390285
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M390285

Highlights

  • [Fitment]: This PHILTOP brake master cylinder replacement for 1995-2000 Toyota Tacoma 2.4L L 4, 1995-2000 Toyota Tacoma 3.4L V 6, 1995-2000 Toyota Tacoma 2.7L L 4.
  • [OE Number]: This PHILTOP brake master cylinder replaces OE#: M390285, 4720104030.
  • [Specification]: Package Includes: 1x Master Cylinder - M390285, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M10 X 1.0, Secondary Outlet Thread Diameter: M10 X 1.0, Master Cylinder Bore Diameter: 1 in.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1995 - 20001995 - 20001995 - 20001998199819981998 - 20001998 - 20001998 - 20001998 - 20001998 - 20001995 - 2000
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacoma
TrimBaseBaseBaseDLXDLXDLXLimitedPre RunnerPre RunnerSR5SR5SR5
Engine2.4L L42.7L L43.4L V62.4L L42.7L L43.4L V63.4L V62.7L L43.4L V62.4L L42.7L L43.4L V6
Note
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

John Lawing

05/07/2026

Verified buyer

100% fixed the problem.

Steve_DIYer_766

03/23/2026

Fast shipping and the part was a breeze to install. Everything lined up perfectly. Couldn't be happier with the ease of this repair.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Possible signs include a pedal that slowly sinks, inconsistent pedal feel, fluid leakage, or difficulty building hydraulic pressure. Air, external leaks, and other brake components can cause similar symptoms.

Included components vary by part number. Check the package list and product images to confirm whether the reservoir or Sensor are supplied.