1997-2003 Mitsubishi Montero Sport 3.0L/3.5L | 0.938 in Brake Master Cylinder w/o Sensor w/Reservoir | M390089 - PHILTOP

1997-2003 Mitsubishi Montero Sport 3.0L/3.5L | 0.938 in Brake Master Cylinder w/o Sensor w/Reservoir | M390089 - PHILTOP

Sensor Not Included

Reservoir Included

Leak-Resistant Seal

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3725BMC019FUS

Specifications

Brand
PHILTOP
Bore Diameter
0.938 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
No
Items Included
1x Master Cylinder - M390089
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M390089

Highlights

  • [Fitment]: This PHILTOP brake master cylinder replacement for 1997-1999 2001-2003 Mitsubishi Montero Sport 3.0L V 6, 1992-1993 1997-2000 Mitsubishi Montero, 1994-1996 Mitsubishi Montero 3.0L V 6, 1994-1996 Mitsubishi Montero 3.5L V 6, 1999 Mitsubishi Montero Sport 3.5L V 6.
  • [OE Number]: This PHILTOP brake master cylinder replaces OE#: M390089, MB618717.
  • [Specification]: Package Includes: 1x Master Cylinder - M390089, Reservoir Included: Yes, Sensor Included: No, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M10 X 1.0, Secondary Outlet Thread Diameter: M10 X 1.0, Master Cylinder Bore Diameter: 0.938 in.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1998 - 20001992 - 1996199719931992 - 19931994 - 19972001 - 20031997 - 199919991997 - 1999
MakeMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishiMitsubishi
ModelMonteroMonteroMonteroMonteroMonteroMonteroMontero SportMontero SportMontero SportMontero Sport
TrimBaseLSLSRSSRSRESLSLimitedXLS
Engine3.5L V63.0L V63.5L V63.0L V63.0L V63.5L V63.0L V63.0L V63.5L V63.0L V6
Note
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.
Bore: 15/16 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Steve_DIYer_894

03/11/2026

The construction of this master cylinder is really good. Feels very robust and well-made. For the price, it's an outstanding value. Highly recommended.

Kelly_SUV_Life_452

12/13/2025

Swapping this out was surprisingly easy, fit like a glove on my Montero Sport. And the shipping was incredibly fast, I got it the very next day. Impressive!

FAQS

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Possible signs include a pedal that slowly sinks, inconsistent pedal feel, fluid leakage, or difficulty building hydraulic pressure. Air, external leaks, and other brake components can cause similar symptoms.

Included components vary by part number. Check the package list and product images to confirm whether the reservoir or Sensor are supplied.