2007-2009 Ford Ranger 4.0L | 1.063 in Brake Master Cylinder w/Reservoir w/Sensor | M630520 - PHILTOP

2007-2009 Ford Ranger 4.0L | 1.063 in Brake Master Cylinder w/Reservoir w/Sensor | M630520 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4162BMC159WUS

Specifications

Brand
PHILTOP
Bore Diameter
1.063 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630520
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630520

Highlights

  • [Fitment]: This PHILTOP brake master cylinder replacement for 2007-2009 Ford Ranger.
  • [OE Number]: This PHILTOP brake master cylinder replaces OE#: M630520, 7L5Z2140AA.
  • [Specification]: Package Includes: 1x Master Cylinder - M630520, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M10 X 1.0, Secondary Outlet Thread Diameter: M12 X 1.0, Master Cylinder Bore Diameter: 1.063 in.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2007 - 200920072007200720092007 - 20082007 - 20092007 - 20092007 - 20082007 - 20092007 - 20092007 - 20082007 - 2009
MakeFordFordFordFordFordFordFordFordFordFordFordFordFord
ModelRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRangerRanger
TrimFX4STXSTXSTXSportSportSportXLXLXLXLTXLTXLT
Engine4.0L V62.3L L43.0L V64.0L V62.3L L43.0L V64.0L V62.3L L43.0L V64.0L V62.3L L43.0L V64.0L V6
Note
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.
Bore: 1.0625 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.5/5

Based on 4 reviews

550%
450%
30%
20%
10%

Kelly_SUV_Life_246

03/27/2026

I was really impressed with the quality of this brake master cylinder. It feels very solid and well-made. Considering how much a dealer part would cost, this is an amazing value.

Amanda_MomOfThree_995

12/13/2025

Installation was surprisingly simple on my Ranger. All the fittings were correct and it went on without a hitch. Delivery was fast too, which is always a plus.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.