2008-2018 Toyota Tacoma 2.7L/4.0L/3.5L | 0.813 in Brake Master Cylinder w/Sensor w/Reservoir | M630598 - PHILTOP

2008-2018 Toyota Tacoma 2.7L/4.0L/3.5L | 0.813 in Brake Master Cylinder w/Sensor w/Reservoir | M630598 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.2

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4053BMC243QUS

Specifications

Brand
PHILTOP
Bore Diameter
0.813 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630598
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630598

Highlights

  • [Fitment]: This PHILTOP brake master cylinder replacement for 2008-2015 Toyota Tacoma 4.0L V 6, 2016-2018 Toyota Tacoma 3.5L V 6, 2008-2018 Toyota Tacoma 2.7L L 4.
  • [OE Number]: This PHILTOP brake master cylinder replaces OE#: M630598, 4720104160.
  • [Specification]: Package Includes: 1x Master Cylinder - M630598, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M12 X 1.0, Secondary Outlet Thread Diameter: M12 X 1.0, Master Cylinder Bore Diameter: 0.813 in.
  • [Precise Replacement]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [Note]: Please check the “Suncentauto Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Suncentauto Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20102011 - 20152008 - 20102011 - 201520162008 - 20102008 - 20102016 - 201720182016 - 20172018201620162016 - 201720182017201820152016 - 201720182008 - 20102011 - 2013
MakeToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacoma
TrimBaseBaseBaseBaseLimitedPre RunnerPre RunnerSRSRSRSRSR5SR5TRD Off-RoadTRD Off-RoadTRD ProTRD ProTRD ProTRD SportTRD SportX-RunnerX-Runner
Engine2.7L L42.7L L44.0L V64.0L V63.5L V62.7L L44.0L V62.7L L42.7L L43.5L V63.5L V62.7L L43.5L V63.5L V63.5L V63.5L V63.5L V64.0L V63.5L V63.5L V64.0L V64.0L V6
Note
w/o Stability Control
w/o Skid Plate;w/o Trailer Tow Package
w/o Stability Control
w/o Skid Plate;w/o Trailer Tow Package
-
w/o Stability Control
w/o Stability Control
-
w/o Off Road Package
-
w/o Off Road Package
---
w/o Off Road Package
-
w/o Off Road Package
w/o Skid Plate;w/o Trailer Tow Package
-
w/o Off Road Package
w/o Stability Control
w/o Skid Plate;w/o Trailer Tow Package

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.2/5

Based on 5 reviews

540%
440%
320%
20%
10%

Rob_HomeGarage_761

03/31/2026

Got here quicker than I expected! The installation was pretty easy, everything fit like a glove. My brakes are working perfectly again.

DaveTheMechanic_956

10/07/2025

Solid construction and a fraction of the cost of OEM parts. My Tacoma stops on a dime now. Excellent value and performance.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

The system normally requires bleeding after the hydraulic lines are opened. The correct sequence and method vary by vehicle, and some ABS systems may require a scan tool.

It may be possible when the design matches and the reservoir is undamaged. Use suitable new seals where required and inspect the connection for leaks.