2008-2012 Honda Accord 2.4L/3.5L | 0.813 in Brake Master Cylinder w/Reservoir w/Sensor | M630604 - PHILTOP

2008-2012 Honda Accord 2.4L/3.5L | 0.813 in Brake Master Cylinder w/Reservoir w/Sensor | M630604 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7126BMC167RUS

Specifications

Brand
PHILTOP
Bore Diameter
0.813 in
Outlet Count
2
Rearward Outlet Size
M12 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M12 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630604
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630604

Highlights

  • [FITMENT]: This Aluminium brake master cylinder with reversior replacement for 2008-2012 Honda Accord, 2010 Acura TSX.
  • [OE NUMBER]: This PHILTOP Aluminium brake master cylinder with reversior replaces OE#: M630604, 46100TA1A01.
  • [SPECIFICATION]: Package Includes: 1x Master Cylinder - M630604, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M12 X 1.0, Secondary Outlet Thread Diameter: M12 X 1.0, Master Cylinder Bore Diameter: 0.813 in.
  • [PRECISE REPLACEMENT]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [ALL CLIMATE RELIABLE]: Built for real-world extremes, it delivers dependable braking whether on a freezing -40℃ morning or during demanding drives in 150℃ engine heat, eliminating performance fade and cold-start issues.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20142012 - 20142010 - 20142008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122008 - 20122011 - 2012
MakeAcuraAcuraAcuraHondaHondaHondaHondaHondaHondaHondaHonda
ModelTSXTSXTSXAccordAccordAccordAccordAccordAccordAccordAccord
TrimBaseSpecial EditionV6EXEXEX-LEX-LLXLX-PLX-SSE
Engine2.4L L42.4L L43.5L V62.4L L43.5L V62.4L L43.5L V62.4L L42.4L L42.4L L42.4L L4
Note
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.
Bore: 13/16 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.7/5

Based on 13 reviews

577%
415%
38%
20%
10%

Alvaro Alvarez

01/27/2026

Verified buyer

De muy buena calidad después de dos meses de uso no a dado ningún problema solo acusas un dados 12 y una llave español 12 para cambierla

Christopher Mabe

08/21/2025

Verified buyer

Fast service, installed it in no time.

FAQS

Check the package contents listed on the product page. If an included item is missing, contact us with your order number and photos of everything received.

Warranty coverage and duration may vary by product. For specific warranty period details by product category, please refer to our Warranty & Returns Policy page. Damage related to incorrect fitment, installation or other vehicle problems may require further review.

Please do not install the product. Take photos of the item, packaging and shipping label, then contact Philtop customer support as soon as possible for assistance.