2003-2004 Nissan Frontier 2.4L L4/3.3L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M630363 - PHILTOP

2003-2004 Nissan Frontier 2.4L L4/3.3L V6 | 1 in Brake Master Cylinder w/Reservoir w/Sensor | M630363 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2636BMC239SUS

Specifications

Brand
PHILTOP
Bore Diameter
1 in
Outlet Count
3
Rearward Outlet Size
M10 X 1.0 and 3/8-24
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630363
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630363

Highlights

  • [FITMENT]: This Aluminium brake master cylinder with reversior replacement for 2003-2004 Nissan Frontier 2.4L L 4, 2003-2004 Nissan Xterra 3.3L V 6, 2003-2004 Nissan Frontier 3.3L V 6, 2003-2004 Nissan Xterra 2.4L L 4.
  • [OE NUMBER]: This PHILTOP Aluminium brake master cylinder with reversior replaces OE#: M630363, 460102Z600.
  • [SPECIFICATION]: Package Includes: 1x Master Cylinder - M630363, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 3, Rearward Outlet Size: M10 x 1.0 and 3/8-24, Secondary Outlet Thread Diameter: M10 X 1.0, Master Cylinder Bore Diameter: 1 in.
  • [PRECISE REPLACEMENT]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [ALL CLIMATE RELIABLE]: Built for real-world extremes, it delivers dependable braking whether on a freezing -40℃ morning or during demanding drives in 150℃ engine heat, eliminating performance fade and cold-start issues.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200320032003 - 20042003 - 20042003 - 20042003 - 20042003 - 2004
MakeNissanNissanNissanNissanNissanNissanNissan
ModelFrontierFrontierFrontierFrontierXterraXterraXterra
TrimBaseSEXEXESEXEXE
Engine2.4L L43.3L V62.4L L43.3L V63.3L V62.4L L43.3L V6
Note
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.
Bore: 1 In.

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.8/5

Based on 10 reviews

580%
420%
30%
20%
10%

Clifford Palau

05/04/2026

Verified buyer

Fit perfect

N/A

01/24/2026

Verified buyer

It was the right part worked well no problems. I would buy it again. Have a great day thanks.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

It may be possible when the design matches and the reservoir is undamaged. Use suitable new seals where required and inspect the connection for leaks.

Remaining air, an external leak, incorrect pushrod clearance, flexible hose expansion, caliper issues, or an ABS bleeding requirement may contribute to a soft pedal.