2005-2007 Toyota Tacoma 2.7L L4/4.0L V6 | 1.625 in Brake Master Cylinder w/Reservoir w/Sensor | M630478 - PHILTOP

2005-2007 Toyota Tacoma 2.7L L4/4.0L V6 | 1.625 in Brake Master Cylinder w/Reservoir w/Sensor | M630478 - PHILTOP

Sensor Included

Reservoir Included

Leak-Resistant Seal

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5695BMC177AUS

Specifications

Brand
PHILTOP
Bore Diameter
1.625 in
Outlet Count
2
Rearward Outlet Size
M10 X 1.0
Reservoir Included
Yes
Secondary Outlet Thread Size
M10 X 1.0
Sensor Included
Yes
Items Included
1x Master Cylinder - M630478
Material
Aluminum
Quantity
1
Warranty Period
2-Year
Part Number
M630478

Highlights

  • [FITMENT]: This Aluminium brake master cylinder with reversior replacement for 2005-2007 Toyota Tacoma 4.0L V 6, 2006-2007 Toyota Tacoma 2.7L L 4.
  • [OE NUMBER]: This PHILTOP Aluminium brake master cylinder with reversior replaces OE#: M630478, 4702804030.
  • [SPECIFICATION]: Package Includes: 1x Master Cylinder - M630478, Reservoir Included: Yes, Sensor Included: Yes, Material: Aluminum, Number of Outlets: 2, Rearward Outlet Size: M10 X 1.0, Secondary Outlet Thread Diameter: M10 X 1.0, Master Cylinder Bore Diameter: 1.625 in.
  • [PRECISE REPLACEMENT]: PHILTOP Brake Master Cylinder Assembly are made entirely of new materials, not remanufactured, to ensure highest quality and safety; cylinder housing is constructed to match the casting material of the original part and ensure similar performance.
  • [ALL CLIMATE RELIABLE]: Built for real-world extremes, it delivers dependable braking whether on a freezing -40℃ morning or during demanding drives in 150℃ engine heat, eliminating performance fade and cold-start issues.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20072005 - 20072005 - 20072005 - 20072006
MakeToyotaToyotaToyotaToyotaToyota
ModelTacomaTacomaTacomaTacomaTacoma
TrimBaseBasePre RunnerPre RunnerX-Runner
Engine2.7L L44.0L V62.7L L44.0L V64.0L V6
Note
Bore: 13/16 In.;w/o Stability Control
Bore: 13/16 In.;w/o Stability Control
Bore: 13/16 In.;w/o Stability Control
Bore: 13/16 In.;w/o Stability Control
Bore: 13/16 In.;w/o Stability Control

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Remove the Old Unit: Extract the brake fluid, disconnect the brake lines and cap all openings immediately to prevent air and contamination from entering.
  • Step-2: Inspect the Booster: Remove the old master cylinder. Inspect the booster push rod, seal and mounting surface for wear, deformation or fluid leakage.
  • Step-3: Bench-Bleed the New Master Cylinder: Bench-bleed the new master cylinder with fresh, vehicle-approved brake fluid until no air bubbles remain. Follow the product instructions or vehicle service manual.
  • Step-4: Install the New Unit: Align the master cylinder with the booster push rod. Hand-start the mounting nuts, then tighten them evenly to the specified torque. Do not force the master cylinder into position.
  • Step-5: Reconnect the Brake Lines: Hand-start each brake-line fitting to prevent cross-threading, then tighten it to the vehicle manufacturer’s specification.
  • Step-6: Fill and Bleed the Brake System: Fill the reservoir with fresh brake fluid to the MAX line. Bleed the complete brake system in the sequence specified by the vehicle service manual. Keep the fluid level above MIN throughout the process. ABS/ESP systems may require a scan tool.

After Installation

  • Bleed the complete brake system after installation, following the sequence specified in the vehicle service manual. Keep the reservoir above MIN throughout the process.
  • Refill the brake fluid to the MAX line after bleeding.
  • With the engine off, pump the brake pedal until it feels firm with normal travel.
  • Check the brake-line fittings and master-cylinder-to-booster surface for leaks.
  • Confirm that the brake and ABS warning lights are off.
  • Perform a low-speed road test and confirm effective, straight braking.
  • Recheck the fluid level and all connections after the road test.

Product Video

Product Description

14

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

Lottie

08/23/2026

Verified buyer

Fit perfectly. Made of good material, seems to be durable.

Jason_Trucks_619

04/06/2026

This master cylinder looks and feels like a quality part. The casting is smooth and everything fits together nicely. It's a great option if you're looking for a reliable replacement without breaking the bank.

FAQS

Unused products may be eligible for return according to the Philtop return policy. Please keep the product and packaging in their original condition and contact us before sending it back.

Before driving, press the brake pedal firmly several times until it feels firm, to seat the pads against the rotor.Confirm secure fittings, correct fluid level, no leakage, a stable pedal, normal warning-light status, and proper brake response before normal driving.

Possible signs include a pedal that slowly sinks, inconsistent pedal feel, fluid leakage, or difficulty building hydraulic pressure. Air, external leaks, and other brake components can cause similar symptoms.