2002-2007 Subaru Impreza 2.5L H4/2.0L H4 | CR14 New A/C Compressor | OE#73111FE021/6511692 - PHILTOP

2002-2007 Subaru Impreza 2.5L H4/2.0L H4 | CR14 New A/C Compressor | OE#73111FE021/6511692 - PHILTOP

PAG

CR14

R134a

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
3971ACC582GUS

Specifications

Brand
PHILTOP
Oil Type
Pag 46
Compressor Type
CR14
Belt Type
Serpentine
Refrigerant Type
R134a
Pulley Groove Count
4
Items Included
1x A/C Compressors & Clutches - 58883,1x Manual
Material
Aluminum Alloy Housing,Cast Iron Pulley,Stainless Steel Valve Plate
Power Source
‎Corded Electric
Voltage
12 V
Mounting Type
Tangent Mount
Clutch Diameter
5 in/127 mm
Maximum Working Pressure
18 bar
Warranty Period
2-Year
OE Number
73111FE021,73111FE040,73111FE020
Part Number
6511692,58883,815640,639772

Highlights

  • #92,632 in Automotive (See Top 100 in Automotive)
  • #87 in Automotive Replacement Air Conditioning Compressors
  • Ensures Fast Refrigeration And Defogging: ①Oil Type:PAG 46;②R-efrigerant Type:R134a;③Pulley Grooves: 4;④Pulley Diameter:5 inch ;⑤Compressor type:CR14;⑥Pulley type:Serpentine;⑦Clutch Included: Yes; ⑧Noise:<72 dB.Our air conditioning compressor supply Stable and Consistent Cooling, It ensures stable and consistent cooling throughout your drive.
  • Widely Compatible: PHILTOP AC Compressor with Clutch Compatible with Impreza 2002-2003, 2004-2007 2.5L, 2004 2.5T, 9-2X 2005-2006.Please confirm your vehicle details and old part number before ordering.
  • Guaranteed Compatibility : Replaces OEM part numbers:73111FE040,73111FE021,C1356,6511692,58883,815640,73111FE020,2011261AM,DW57883,140056C,57883,639772,CO11153ZI,AC1204890,204890,10362861.Verify your vehicle info using the Suncentauto compatibility checker.
  • Fully Tested & Easy Installation: The ac compressor with clutch has been examined and tested carefully before its delivery. Air conditioning compressor is pre-filled with oil upon delivery, therefore, there is no need to add oil during initial use. Excessive oil addition may damage the ac compressor.
  • Low Noise & Low Fuel Consumption: AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062005200620052002 - 20032005 - 20072002 - 200320042002 - 200320042002 - 20032004
MakeSaabSaabSaabSaabSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
Model9-2X9-2X9-2X9-2XImprezaImprezaImprezaImprezaImprezaImprezaImprezaImpreza
Trim2.5iAeroAeroLinearOutbackOutback SportRSRSTSTSWRXWRX STI
Engine2.5L H42.0L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.0L H42.5L H4
Note
w/ CR14 Compressor
w/ CR14 Compressor
w/ CR14 Compressor
w/ CR14 Compressor
w/ CR14 Compressor
w/ CR14 Compressor
w/ CR14 Compressor
-
w/ CR14 Compressor
-
w/ CR14 Compressor
-

How to Install?

Related Diagnostic Codes

  • P0530-A/C refrigerant pressure sensor circuit — inspect the sensor connector, wiring and refrigerant pressure.
  • P0531-Pressure sensor circuit range/performance — check the refrigerant charge, sensor signal and system pressure.
  • P0532–P0533-Pressure sensor circuit low/high input — inspect for wiring faults, refrigerant leaks, overcharging or excessive system pressure.
  • P0646-A/C compressor clutch relay control circuit low — check the relay, power supply, ground connection and related wiring.

These codes may relate to the A/C control system and do not necessarily indicate a faulty compressor. Perform a complete system diagnosis before replacement.

Checks Before Installation

  • Compare the new compressor with the original. Confirm the electrical connector, mounting holes, pulley specifications, and high- and low-pressure port locations match.
  • Check the connector terminals for damage, oxidation or corrosion.
  • Verify the correct refrigerant type, PAG oil type and oil quantity. Shipping oil may not meet the vehicle’s requirements.
  • Inspect the lines and condenser for leaks, blockage or metal contamination. Flush the system if the old compressor seized or failed internally.
  • Recover the refrigerant with approved equipment. Disconnect the battery and allow the engine to cool.

Installation Steps

  • Step-1: Recover the Refrigerant:Professionally recover the refrigerant. Do not release it into the atmosphere or mix different refrigerant types.
  • Step-2: Remove the Old Compressor:Photograph the original layout and label the high-pressure (H) and low-pressure (L) lines. Remove the belt, wiring and refrigerant lines, then seal all open ports immediately.
  • Step-3: Inspect and Clean the System:Check the lines, condenser, expansion valve and receiver-drier for debris or blockage. Flush or replace contaminated components as required.
  • Step-4: Prepare the New Compressor:Adjust the refrigerant oil to the vehicle manufacturer’s specified type and quantity. Do not mix different oil types.
  • Step-5: Install the Compressor:Hand-start the mounting bolts and tighten them diagonally to the specified torque. Install new oil-lubricated O-rings, then reconnect the wiring and H/L lines according to the labels.
  • Step-6: Evacuate and Recharge:Reinstall and tension the drive belt. Evacuate the system for at least 30 minutes, then charge the specified type and amount of refrigerant.

Product Description

PHILTOP AC CompressorAC Compressor

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Brad_AutoParts_723

10/15/2025

My AC was blowing warm air, but this new compressor fixed it right up. It's blowing cold again, and my drives are much more comfortable. Totally worth it.

DIY_Karen_181

03/29/2026

This AC compressor is really well-made. It looks and feels like a quality part, and the price was fantastic. Great value for my Subaru.

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

The system normally needs to be properly evacuated and leak-tested before charging. A/C service equipment and refrigerant handling should follow local requirements.

Possible causes include low refrigerant pressure, a fuse or relay issue, wiring, control logic, a pressure sensor, or clutch-related conditions. Diagnose the control circuit before replacing parts.