Customer
12/20/2025
Verified buyer
Our GLC 300 was starting to get a bit funky smelling inside… time for a new cabin filter. This PHILTOP activated charcoal filter is an exact fit, and changing the filter on the GLC is really easy. Pop the hood open, twist the two thumbscrews holding the plastic cover on over the battery (passenger side), lift off the plastic cover, and you’re looking at the filter housing up against the firewall. There are two plastic clips that need to be squeezed in on both sides, and then the entire filter housing hinges up and lifts off with the filter inside it. It’s an intentionally tight fit, so wiggle the old one out and then wiggle the new one in, paying attention to the airflow direction printed on one edge of the new filter. Reverse the process and you’re done. It’s literally a 5 minute procedure (well, maybe 10 minutes if it’s your first time doing it). This new filter looks better built than the one I pulled out. The pleating on this new one actually looks like it might filter better… it’s got a sort of fuzzy texture on the surface of the material. It sits snugly in the filter housing as it should, with an even seal all around the edges. Why pay $100+ for the dealer to install one when you can buy one of these for less than $17 and do it yourself?



