2009-2017 Chevrolet Traverse 3.6L V6 | Front Passenger Side CV Axle Shaft | OE#25822833/661466 - PHILTOP

2009-2017 Chevrolet Traverse 3.6L V6 | Front Passenger Side CV Axle Shaft | OE#25822833/661466 - PHILTOP

Front Right

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4724SHA3889US

Specifications

Brand
PHILTOP
Position
Front Right
ABS Ring Included
No
Quantity
1
Input Shaft Spline Count
27
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
33
Items Included
1x Front Right Cv Axle Shaft - 66-1466
Axle Nut Included
Yes
Warranty Period
2-Year
OE Number
25822833,20985786
Part Number
661466

Highlights

  • Vehicle Fit: Front Right Complete CV Joint Axle Shaft for GMC Acadia Limited 2017.Please double check that the CV is suitable for your vehicle before purchasing
  • Kit Includes: 1x Front Right cv axle shaft - 66-1466. CV axles are designed to work with your vehicle make and model
  • High Precision Design: CV shafts are manufactured by precision instruments and rigorously tested before sale to make the interface perfectly match your vehicle.The performance of CV shafts is far superior to ordinary types.
  • Top Quality: CV shafts made of high-quality neoprene rubber and grease ensure that the product stays lubricated, helping to extend the life of the CV shaft.
  • Easy Installation: CV axles are carefully designed and tested to work perfectly with your vehicle. The installation process ensures an accurate and secure connection.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2012 - 20132008 - 20112008 - 20112014 - 20172014 - 20172014 - 20172009 - 20172009 - 20172009 - 201620172011 - 201720172010 - 2013201620172007 - 201720172007 - 201720172007 - 20102007 - 2010
MakeBuickBuickBuickBuickBuickBuickChevroletChevroletChevroletChevroletGMCGMCGMCGMCGMCGMCGMCGMCGMCSaturnSaturn
ModelEnclaveEnclaveEnclaveEnclaveEnclaveEnclaveTraverseTraverseTraverseTraverseAcadiaAcadiaAcadiaAcadiaAcadiaAcadiaAcadiaAcadiaAcadia LimitedOutlookOutlook
TrimBaseCXCXLConvenienceLeatherPremiumLSLTLTZPremierDenaliSLSLSLSLESLESLTSLTBaseXEXR
Engine3.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V62.5L L43.6L V63.6L V62.5L L43.6L V62.5L L43.6L V63.6L V63.6L V63.6L V6
Note---------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.5/5

Based on 6 reviews

567%
417%
317%
20%
10%

Kelly_SUV_Life_717

01/28/2026

Delivery was super speedy, arrived in perfect condition. Installation was a breeze, no problems whatsoever. Really happy with the quick service.

Amanda_MomOfThree_970

04/11/2026

My Acadia was making some awful noises, but this axle shaft fixed it right up. Drives so much smoother now. Glad I went with this part.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.