2006-2010 Lexus IS250 2.5L | Front Driver Side & Passenger Side CV Axle Shaft | 665310 - PHILTOP

2006-2010 Lexus IS250 2.5L | Front Driver Side & Passenger Side CV Axle Shaft | 665310 - PHILTOP

Front

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2608SHA4330US

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
No
Quantity
2
Input Shaft Spline Count
23
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
30
Items Included
1x Front Cv Axle Shaft - 66-5310 1x Front Cv Axle Shaft - 66-5311
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
665310,665311

Highlights

  • Vehicle Fit: Front Complete CV Joint Axle Shaft for 2006 GS300 AWD, 2006-2010 IS250 AWD, 2007-2010 GS350 AWD, 2011-2013 IS350 AWD.Please double check that the CV is suitable for your vehicle before purchasing
  • Kit Includes: 1x Front cv axle shaft - 66-5310, 1x Front cv axle shaft - 66-5311. CV axles are designed to work with your vehicle make and model
  • High Precision Design: CV shafts are manufactured by precision instruments and rigorously tested before sale to make the interface perfectly match your vehicle.The performance of CV shafts is far superior to ordinary types.
  • Top Quality: CV shafts made of high-quality neoprene rubber and grease ensure that the product stays lubricated, helping to extend the life of the CV shaft.
  • Easy Installation: CV axles are carefully designed and tested to work perfectly with your vehicle. The installation process ensures an accurate and secure connection.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20062007 - 20102006 - 20102011 - 2013
MakeLexusLexusLexusLexus
ModelGS300GS350IS250IS350
TrimBaseBaseBaseBase
Engine3.0L V63.5L V62.5L V63.5L V6
Note----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Joshua lopez

10/02/2026

Verified buyer

Perfect fit for my 2011 VW Jetta Tdi Manual.

Jason_Trucks_159

04/23/2026

My Lexus was making this awful clicking noise whenever I turned. Replaced the old axles with these and it's completely gone! The ride feels so much smoother now, like it did when it was new. Definitely a great fix.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.

2006-2010 Lexus IS250 CV Axle Front Driver & Passenger Side | 665310 | PHILTOP