1998-2006 Volkswagen Beetle 2.0L | Front Passenger Side CV Axle Shaft | 667251 - PHILTOP

1998-2006 Volkswagen Beetle 2.0L | Front Passenger Side CV Axle Shaft | 667251 - PHILTOP

Front Right

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6555SHA653UUS

Specifications

Brand
PHILTOP
Position
Front Right
ABS Ring Included
No
Quantity
1
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
36
Items Included
1x Front Right Cv Axle Shaft - 66-7251
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
667251

Highlights

  • Vehicle Fit: Front Right Complete CV Joint Axle Shaft for 1998-2000 Beetle 1.9/2.0L(Trans:Manual), 2001-2002 Beetle(EngineDesign:ALH/AVH/AZG,Trans:Manual), 2003-2006 Beetle 1.9/2.0L(Trans:Manual), 1999-2006 Golf 1.8/1.9/2.0L(Trans:Manual), 1999-2004 Jetta 1.8/1.9/2.0L(Trans:Manual), 2005-2005 Jetta(EngineDesign:BBW/BEV/BEW,Trans:Manual), Brazil Built;USA Built.Please double check that the CV is suitable for your vehicle before purchasing
  • Kit Includes: 1x Front cv axle shaft - 66-7251. CV axles are designed to work with your vehicle make and model
  • High Precision Design: CV shafts are manufactured by precision instruments and rigorously tested before sale to make the interface perfectly match your vehicle.The performance of CV shafts is far superior to ordinary types.
  • Top Quality: CV shafts made of high-quality neoprene rubber and grease ensure that the product stays lubricated, helping to extend the life of the CV shaft.
  • Easy Installation: CV axles are carefully designed and tested to work perfectly with your vehicle. The installation process ensures an accurate and secure connection.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year19981999 - 20041999 - 20051999 - 20041999 - 200520052001 - 20022001 - 2002199820061999200020011999200020012002 - 20062000200020011999200020012002 - 20061999200020001999199919992000 - 20052005200019992000 - 2005200519992000 - 20041999
MakeVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagenVolkswagen
ModelBeetleBeetleBeetleBeetleBeetleBeetleBeetleBeetleBeetleBeetleGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfGolfJettaJettaJettaJettaJettaJettaJettaJettaJettaJetta
TrimBaseGLGLGLSGLSGLS TDISportSportTDITDIGLGLGLGLGLGLGLGLSGLSGLSGLSGLSGLSGLSGTIGTI GLSGTI GLSTDIWolfsburg EditionGLGLGL TDIGLSGLSGLSGLS TDITDITDIWolfsburg Edition
Engine2.0L L41.9L L42.0L L41.9L L42.0L L41.9L L41.9L L42.0L L41.9L L41.9L L41.9L L41.9L L41.9L L42.0L L42.0L L42.0L L42.0L L41.8L L41.9L L41.9L L42.0L L42.0L L42.0L L42.0L L42.0L L41.8L L42.0L L41.9L L42.0L L42.0L L42.0L L41.9L L41.8L L42.0L L42.0L L41.9L L41.9L L41.9L L42.0L L4
Note----------
New Body Style
-
Built in Brazil and USA
New Body Style
-
Built in Brazil and USA
---
Built in Brazil and USA
New Body Style
-
Built in Brazil and USA
-
New Body Style
--
New Body Style
New Body Style
New Body Style
---
New Body Style
--
New Body Style
-
New Body Style

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.7/5

Based on 6 reviews

567%
433%
30%
20%
10%

Jennifer_Auto_686

03/23/2026

This thing is built like a tank! Feels super solid and well-machined. For the price, it's an amazing deal, and my Golf drives way better now.

Kelly_SUV_Life_707

01/20/2026

Came in good time and was a perfect fit for my Golf. Installation was straightforward, no wrestling with it at all. Very happy with this purchase.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.