1999-2000 Cadillac Escalade 5.7L V8 | Fuel Pump Assembly | OE#19179597/P74770M - PHILTOP

1999-2000 Cadillac Escalade 5.7L V8 | Fuel Pump Assembly | OE#19179597/P74770M - PHILTOP

Carbon Commutator

Precision Ceramic Resistor

Seal Included

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8787FUP006NUS

Specifications

Brand
PHILTOP
Gasket or Seal Included
Yes
Pressure Sensor Included
No
Strainer Included
Yes
Fuel Level Sender Assembly Included
Yes
Resistance Ohms Empty
40.0 Ω
Resistance Ohms Full
250.0 Ω
Average Flow Rating
32 GPH
In Tank or External
In Tank
Lock Ring Included
No
Material
Metal, Plastic
Maximum Pressure
109.0 PSI
Outlet Outside Diameter
0.375 in
Outlet Quantity
2
Outlet Type
Quick Connect
Pump Structure
Turbine Impeller
Items Included
1x Fuel Pump Assembly - FG0089
Warranty Period
2-Year
OE Number
19179597,P548M,25314022,19369922,P1634M,P1510M,84579849,84671871,25314327,19367489,25314329
Part Number
P74770M,FG0089,SP6149M,9530019,5302300,USEP3972M,USEP3534M

Highlights

Product highlights are being verified.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year1999 - 20001998 - 19991998 - 1999200020001999 - 20001998 - 19991998 - 1999
MakeCadillacChevroletChevroletChevroletChevroletGMCGMCGMC
ModelEscaladeTahoeTahoeTahoeTahoeYukonYukonYukon
TrimBaseLSLTLimitedZ71DenaliSLESLT
Engine5.7L V85.7L V85.7L V85.7L V85.7L V85.7L V85.7L V85.7L V8
Note
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology
Except Export;with Turbine Pump Technology

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
  • Check fuel pressure before confirming that the pump requires replacement.
  • Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
  • Work in a well-ventilated area away from flames, sparks and smoking.
  • Relieve fuel-system pressure and disconnect the negative battery cable.
  • Confirm that a new fuel-pump sealing ring is available.

Installation Steps

  • Step-1: Relieve fuel pressure and clean the area around the tank opening.
  • Step-2: Label and disconnect the fuel lines and electrical connector.
  • Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
  • Step-4: Carefully lift out the old module without damaging the float arm.
  • Step-5: Discard the old sealing ring and install a new one.
  • Step-6: Install the new module in the correct orientation and secure the retaining ring.
  • Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.

After Installation

  • Cycle the ignition ON two or three times without starting to prime the fuel system.
  • Start the engine and inspect every connection for leakage or fuel odor.
  • Verify fuel pressure and fuel-gauge operation.
  • Stop the engine immediately if a leak or strong gasoline odor is detected.
  • Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.

Product Description

Reviews

5.0/5

Based on 5 reviews

5100%
40%
30%
20%
10%

Mardonna Harrison

10/07/2026

Verified buyer

It working good on the vehicle

Bev Brindle

08/01/2026

Verified buyer

My car is working fine.Hoping it stays that way

FAQS

No FAQs have been added for this product yet.