Related Parts: ① Fuel Pump, ② Strainer, ③ Seal Ring.
20% Improved Fuel Delivery Efficiency: The commutator is made of carbon material, achieving an all-round performance leap compared with traditional copper commutators; it features superior electrical performance, shorter arc duration, stable current transmission, reduced motor energy consumption, and enhanced fuel delivery efficiency.
Superior Durability: The contacts are made of gold-palladium alloy with a melting point of up to 1450℃, featuring stable electrical conductivity, excellent corrosion resistance and wear resistance, and can achieve 1 million contact cycles without obvious damage.
Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
Check fuel pressure before confirming that the pump requires replacement.
Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
Work in a well-ventilated area away from flames, sparks and smoking.
Relieve fuel-system pressure and disconnect the negative battery cable.
Confirm that a new fuel-pump sealing ring is available.
Installation Steps
Step-1: Relieve fuel pressure and clean the area around the tank opening.
Step-2: Label and disconnect the fuel lines and electrical connector.
Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
Step-4: Carefully lift out the old module without damaging the float arm.
Step-5: Discard the old sealing ring and install a new one.
Step-6: Install the new module in the correct orientation and secure the retaining ring.
Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
Cycle the ignition ON two or three times without starting to prime the fuel system.
Start the engine and inspect every connection for leakage or fuel odor.
Verify fuel pressure and fuel-gauge operation.
Stop the engine immediately if a leak or strong gasoline odor is detected.
Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
D
Dahlia Murray
09/16/2026
Verified buyer
Got this for my husband to work on a friend’s truck. It comes with the fuel pump, strainer, seal ring, installation hardware, and an instruction guide, so we didn’t have to hunt down a bunch of extra parts. Everything comes pre-assembled, which made the job easier
FAQS
No FAQs have been added for this product yet.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2007-2008 Chevrolet Silverado 3500 HD 6.6L V8 | Fuel Pump Assembly | OE#19331306/FG0358 - PHILTOP
Carbon Commutator
Precision Ceramic Resistor
Seal Included
SKU:
6708FUP406MUS
5.0
$88.74$8874
Check if this fits your vehicle
Select a vehicle to check this product.
Gasket or Seal Included
Yes
Pressure Sensor Included
No
Strainer Included
Yes
Fuel Level Sender Assembly Included
Yes
Resistance Ohms Empty
250.0 Ω
Resistance Ohms Full
40.0 Ω
In Tank or External
In Tank
Material
Metal, Plastic
Fitment: Compatible with [Chevrolet] 2004-2006 Silverado 2500 HD(engDesign: LLY; BedLength:78.0/96.0), 2006 Silverado 2500 HD(engDesign: LBZ; BedLength:78.0/96.0), 2007-2008 Silverado 2500 HD(engDesign: LMM; BedLength:78.8/97.6), 2007 Silverado 2500 HD Classic 6.6L, 2004-2006 Silverado 3500 Crew/Extended/Standard Cab(engDesign: LLY), 2006 Silverado 3500 Crew/Extended/Standard Cab(engDesign: LBZ), 2007 Silverado 3500 HD/3500 Classic 6.6L Crew/Extended/Standard Cab, 2008 Silverado 3500 HD 6.6L, [GMC] 2004 Sierra 2500 HD(engDesign: LLY), 2005-2006 Sierra 2500 HD 6.6L(engDesign: LBZ; BedLength:78.0/96.0), 2007-2008 Sierra 2500 HD 6.6L, 2007 Sierra 2500 HD Classic 6.6L.
Related Parts: ① Fuel Pump, ② Strainer, ③ Seal Ring.
20% Improved Fuel Delivery Efficiency: The commutator is made of carbon material, achieving an all-round performance leap compared with traditional copper commutators; it features superior electrical performance, shorter arc duration, stable current transmission, reduced motor energy consumption, and enhanced fuel delivery efficiency.
Superior Durability: The contacts are made of gold-palladium alloy with a melting point of up to 1450℃, featuring stable electrical conductivity, excellent corrosion resistance and wear resistance, and can achieve 1 million contact cycles without obvious damage.
Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
Check fuel pressure before confirming that the pump requires replacement.
Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
Work in a well-ventilated area away from flames, sparks and smoking.
Relieve fuel-system pressure and disconnect the negative battery cable.
Confirm that a new fuel-pump sealing ring is available.
Installation Steps
Step-1: Relieve fuel pressure and clean the area around the tank opening.
Step-2: Label and disconnect the fuel lines and electrical connector.
Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
Step-4: Carefully lift out the old module without damaging the float arm.
Step-5: Discard the old sealing ring and install a new one.
Step-6: Install the new module in the correct orientation and secure the retaining ring.
Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.
After Installation
Cycle the ignition ON two or three times without starting to prime the fuel system.
Start the engine and inspect every connection for leakage or fuel odor.
Verify fuel pressure and fuel-gauge operation.
Stop the engine immediately if a leak or strong gasoline odor is detected.
Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
D
Dahlia Murray
Sep 16,2026
Verified buyer
Got this for my husband to work on a friend’s truck. It comes with the fuel pump, strainer, seal ring, installation hardware, and an instruction guide, so we didn’t have to hunt down a bunch of extra parts. Everything comes pre-assembled, which made the job easier