2001-2005 Dodge Neon 2.0L | Fuel Pump Assembly | OE#5101795AA/P75027M - PHILTOP

2001-2005 Dodge Neon 2.0L | Fuel Pump Assembly | OE#5101795AA/P75027M - PHILTOP

Carbon Commutator

Precision Ceramic Resistor

Seal Included

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1007FUP124ZUS

Specifications

Brand
PHILTOP
Gasket or Seal Included
Yes
Pressure Sensor Included
No
Strainer Included
Yes
Fuel Level Sender Assembly Included
Yes
Resistance Ohms Empty
115.0 Ω
Resistance Ohms Full
1010.0 Ω
Average Flow Rating
20 GPH
In Tank or External
In Tank
Lock Ring Included
No
Material
Metal, Plastic
Maximum Pressure
94.0 PSI
Outlet Outside Diameter
0.375 in
Outlet Quantity
1
Outlet Type
Quick Connect
Pump Structure
Turbine Impeller
Items Included
1x Fuel Pump Assembly - FG0426
Warranty Period
2-Year
OE Number
5101795AA,P636M,P618M,5018697AA,RL018697AA,5018697AB
Part Number
P75027M,FG0426,SP7142M,TU154,9533038,5202310,USEP7142M,E7142M,E7124M,F3153A,9533040,4010304,150082,M2246732,MO166,EFG0426,2920104,830981,D13111126TG,C0453M,237868,A31014,TNKSP7142M,FP5250

Highlights

Product highlights are being verified.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2001 - 20022001 - 20022001 - 20022001 - 200420022001 - 20052003 - 200520012001
MakeDodgeDodgeDodgeDodgeDodgeDodgeDodgePlymouthPlymouth
ModelNeonNeonNeonNeonNeonNeonNeonNeonNeon
TrimACRBaseESR/TSSESXTHigh LineLX
Engine2.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L42.0L L4
Note---------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the fuel-pump sound at key-on and test the fuse, relay, power supply and ground.
  • Check fuel pressure before confirming that the pump requires replacement.
  • Compare the connector, fuel ports, mounting points and fuel-level sensor with the original unit.
  • Work in a well-ventilated area away from flames, sparks and smoking.
  • Relieve fuel-system pressure and disconnect the negative battery cable.
  • Confirm that a new fuel-pump sealing ring is available.

Installation Steps

  • Step-1: Relieve fuel pressure and clean the area around the tank opening.
  • Step-2: Label and disconnect the fuel lines and electrical connector.
  • Step-3: Remove the retaining ring using the correct tool—never strike it with a steel tool.
  • Step-4: Carefully lift out the old module without damaging the float arm.
  • Step-5: Discard the old sealing ring and install a new one.
  • Step-6: Install the new module in the correct orientation and secure the retaining ring.
  • Step-7: Reconnect the fuel lines and electrical connector, ensuring every clip is locked.

After Installation

  • Cycle the ignition ON two or three times without starting to prime the fuel system.
  • Start the engine and inspect every connection for leakage or fuel odor.
  • Verify fuel pressure and fuel-gauge operation.
  • Stop the engine immediately if a leak or strong gasoline odor is detected.
  • Avoid regularly operating the vehicle with a very low fuel level, which may overheat the pump.

Product Description

Electric Fuel PumpElectric Fuel Pump

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Bernardo mendez

06/23/2025

Verified buyer

Excelente 👌

erlene halzle

05/18/2024

Verified buyer

It was as described ,I had no problem with the installation it took me less than an hour from putting it on the ramps to driving it off

FAQS

No FAQs have been added for this product yet.

2001-2005 Dodge Neon Fuel Pump Assembly 5101795AA | PHILTOP