2006-2010 Jeep Commander 3.7L V6 | 1 PC Front Wheel Bearing | OE#52089434AB/513234 - PHILTOP

2006-2010 Jeep Commander 3.7L V6 | 1 PC Front Wheel Bearing | OE#52089434AB/513234 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8869WBK290SUS

Specifications

Brand
PHILTOP
ABS Type
Speed Sensor
Lug Count
5
Position
Front
Flange Bolt Hole Count
3
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 513234,Installation Instructions
Bolt Pattern
5 X 5
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3.9 in
Wheel Stud Size
1/2"x20 Unf
Flange Offset
2.05 in/52 mm
Flange Diameter
6.5 in/165.0 mm
Brake Pilot Diameter
2.83 in/71.9 mm
Warranty Period
2-Year
OE Number
52089434AB,52089434AD,52089434AE,52089434AC,52089434AA,5175377AA
Part Number
513234,HA590036,7200351,40267015,BR930634,WE61159,713234,40267015E,H513234,NT513234,102292,G513234,TXF513234,PT513234,559586,FW9234
Quantity
1

Highlights

  • Wide Compatibility: PHILTOP Wheel Bearing and Hub Assembly fit for Commander 2006-2010 ,Grand Cherokee 2005-2010 .
  • Outstanding Quality: Wheel bearings are manufactured in accordance with the quality standards of the original manufacturer. Our careful selection of materials and excellent manufacturing process create excellent wheel bearings.
  • Tips: Before purchasing wheel bearings, it is essential to verify that the wheel hub assembly is suitable for your vehicle.
  • Long Service life: Wheel bearings are characterized by good resistance to wear, corrosion and aging. These characteristics maximize the strength and durability of the wheel hub.
  • Easy Installation: Wheel bearings are installed in place and fit the original car. Wheel bearings are easy to install, no drilling or modification required, convenient for you to replace at home.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year200620062006 - 20072006 - 20072006 - 20092006 - 20102007 - 20092007 - 20102007 - 20092010200620062007 - 20092005 - 20102005 - 200920102007 - 20092009 - 20102005 - 20092005 - 20102007 - 20092006 - 20092006 - 2010
MakeJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeepJeep
ModelCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderCommanderGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand CherokeeGrand Cherokee
Trim65th Anniversary Edition65th Anniversary EditionBaseBaseLimitedLimitedOverlandSportSportSport65th Anniversary Edition65th Anniversary EditionLaredoLaredoLaredoLaredoLimitedLimitedLimitedLimitedOverlandOverlandSRT8
Engine3.7L V64.7L V83.7L V64.7L V84.7L V85.7L V85.7L V83.7L V64.7L V85.7L V83.7L V64.7L V83.0L V63.7L V64.7L V85.7L V83.0L V63.7L V64.7L V85.7L V83.0L V65.7L V86.1L V8
Note-----------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

5.0/5

Based on 2 reviews

5100%
40%
30%
20%
10%

Where's Waldo

12/23/2023

Verified buyer

If you can wait a couple of days for delivery, buy this!I needed to change one on the front of my 2009 Grand Cherokee (180,000+ miles and going strong!) and I compared the price of this against a local auto parts store. They have three options locally, $199, $239, and $221. Only the $199 is in stock. Luckily, I have another vehicle so this one not being driven for a few days is no big deal. I cannot believe the price difference for what seems to be the exact same part.It bolted right on, no fitment issues at all. I always tend to buy my auto parts online just because the price is so much better as it is very likely they are all rolling out of the same 2-3 factories somewhere.Complete no-brainer on this purchase. Save yourself some serious $$$ and pick this one up if you need a wheels bearing.

Where's Waldo

12/23/2023

Verified buyer

If you can wait a couple of days for delivery, buy this! I needed to change one on the front of my 2009 Grand Cherokee (180,000+ miles and going strong!) and I compared the price of this against a local auto parts store. They have three options locally, $199, $239, and $221. Only the $199 is in stock. Luckily, I have another vehicle so this one not being driven for a few days is no big deal. I cannot believe the price difference for what seems to be the exact same part. It bolted right on, no fitment issues at all. I always tend to buy my auto parts online just because the price is so much better as it is very likely they are all rolling out of the same 2-3 factories somewhere. Complete no-brainer on this purchase. Save yourself some serious $$$ and pick this one up if you need a wheels bearing.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

The design depends on the application. Compare the product type and images with the original part before installation; press-in bearings generally require suitable shop tools.

Some bearings have a magnetic encoder or sealing side that must face a particular direction. Follow the vehicle service information and any markings supplied with the part.