2008-2014 Subaru Impreza 2.5L H4/2.0L H4 | 1 PC Front Wheel Bearing | 28373FG000/513303 - PHILTOP

2008-2014 Subaru Impreza 2.5L H4/2.0L H4 | 1 PC Front Wheel Bearing | 28373FG000/513303 - PHILTOP

Triple-Lip Seal

Front

AISI 52100

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9083WBK280LUS

Specifications

Brand
PHILTOP
ABS Type
Magnetic Ring
Lug Count
5
Position
Front
Flange Bolt Hole Count
4
Material
SAE 1055 Steel and SAE 52100 Steel
Items Included
1x Front Wheel Hub and Bearing Assembly - 513303,Installation Instructions
Bolt Pattern
5 X 3.94
Surface Finish
Polished, Rust Protected
Hub Pilot Diameter
3 in
Wheel Stud Size
M12*1.25
Flange Offset
1.93 in/49 mm
Flange Diameter
4.88 in/124.0 mm
Brake Pilot Diameter
2.28 in/58.0 mm
Warranty Period
2-Year
OE Number
28373FG000
Part Number
513303,HA590315
Quantity
1

Highlights

  • Wide Compatibility: PHILTOP Wheel Bearing and Hub Assembly fit for 2009-2014 Subaru Forester, 2008-2014 Subaru Impreza, 2013-2014 Subaru XV Crosstrek.
  • Product Details: Anti Lock Brake Sensor Included : Yes, Bolt Circle Diameter : 100.000 mm, Brake Pilot Diameter : 58.000 mm, Flange Bolt Hole Quantity : 4, Flange Diameter : 124.000 mm, Flange Offset : 49.000 mm, Flange Shape : MODIFIED, Hub Pilot Diameter : 76.000 mm, Spline Quantity : 27, Wheel Pilot Diameter : 56.000 mm, Wheel Stud Quantity : 5 .
  • Outstanding Quality: Wheel bearings are manufactured in accordance with the quality standards of the original manufacturer. Our careful selection of materials and excellent manufacturing process create excellent wheel bearings.
  • Long Service life: Wheel bearings are characterized by good resistance to wear, corrosion and aging. These characteristics maximize the strength and durability of the wheel hub.
  • Easy Installation: Wheel bearings are installed in place and fit the original car. Wheel bearings are easy to install, no drilling or modification required, convenient for you to replace at home.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2014201420142014201420142009 - 20132009 - 20132009 - 20132011 - 201320092009 - 20102010 - 20132011 - 20132009 - 20102008 - 20112010 - 20112012 - 20132012 - 20132008 - 20112012 - 20132012 - 20132012 - 20132008 - 20142010 - 20142009 - 2014201420142013201420132014
MakeSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaruSubaru
ModelForesterForesterForesterForesterForesterForesterForesterForesterForesterForesterForesterForesterForesterForesterImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaImprezaXV CrosstrekXV CrosstrekXV CrosstrekXV CrosstrekXV CrosstrekXV Crosstrek
Trim2.0XT Premium2.0XT Touring2.5i2.5i Limited2.5i Premium2.5i TouringXX LimitedX PremiumX TouringXTXT LimitedXT PremiumXT Touring2.5 GT2.5i2.5i PremiumBaseLimitedOutback SportPremiumSport LimitedSport PremiumWRXWRX LimitedWRX PremiumHybridHybrid TouringLimitedLimitedPremiumPremium
Engine2.0L H42.0L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.5L H42.0L H42.0L H42.5L H42.0L H42.0L H42.0L H42.5L H42.5L H42.5L H42.0L H42.0L H42.0L H42.0L H42.0L H42.0L H4
Note
To 01/14/2014
To 01/14/2014
To 01/14/2014
To 01/14/2014
To 01/14/2014
To 01/14/2014
--------------------
Thru 01/14/2014
Thru 01/14/2014
-
Thru 01/14/2014
-
Thru 01/14/2014

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, position, drive type and ABS compatibility.
  • Compare the mounting holes, splines and sensor configuration with the original part.
  • Prepare a press or puller and the vehicle-specific torque specifications.
  • Park on level ground, chock the wheels and support the vehicle with jack stands.

Installation Steps

  • Step-1: Loosen the Axle Nut:Loosen the axle nut while the vehicle is on the ground, then raise and secure the vehicle.
  • Step-2: Remove the Components:Remove the wheel, brake caliper and rotor. Support the caliper without pulling on the brake hose.
  • Step-3: Remove the Old Bearing:Disconnect the ABS sensor and use the correct puller or press. Do not hammer the bearing or steering knuckle.
  • Step-4: Clean the Mounting Surface:Remove rust, dirt and debris to ensure the new bearing seats correctly.
  • Step-5: Install the New Bearing:Install the ABS encoder in the correct direction and press the bearing evenly into position.
  • Step-6: Reassemble and Torque:Start all bolts by hand, reinstall the components and tighten all fasteners to the OE-specified torque.

After Installation

  • Rotate the wheel and check for noise, resistance or play.
  • Confirm proper brake operation and make sure the ABS light is off.
  • Perform a low-speed road test and check for vibration, steering pull or unusual noise.
  • Retorque after approximately 100 km when required by the vehicle manufacturer.

Critical Installation Notes

  • Use the Correct Pressing Surface: Press on the outer race when installing the bearing into the steering knuckle; press on the inner race when installing it onto the hub.
  • Do Not Use an Impact Wrench for Final Tightening: Complete final tightening with a torque wrench.
  • Replace the Axle Nut: Most self-locking axle nuts are designed for one-time use.
  • Protect the ABS Components: Keep grease and debris away from the magnetic encoder and wheel speed sensor.
  • Start Bolts by Hand: Thread bolts two or three turns before using power tools.
  • Follow OE Torque Specifications: Over-tightening can preload the bearing; under-tightening can cause looseness.

Product Video

Product Description

11

Reviews

4.6/5

Based on 8 reviews

575%
413%
313%
20%
10%

Customer

05/24/2025

Verified buyer

Easy to install. Works great. Cost way lower than les schwab .

bflet62

11/03/2024

Verified buyer

didn't think it would work but worked as should would recommend. Read more

FAQS

Please provide your order number, vehicle information, installation date, current mileage and a description of the issue. Photos, videos or inspection information may also help us review the claim.

Torque values differ by vehicle and fastener. Use the vehicle manufacturer’s specification rather than a general value, as incorrect torque may affect bearing operation.

Alignment may be advisable if suspension or steering components are disturbed during the repair. Follow the vehicle service procedure and check alignment if the vehicle pulls or the steering wheel is off-center.