2003-2022 Toyota 4Runner 4.0L/4.7L/2.7L | Front Driver Side & Passenger Side CV Axle Shaft | 665235 - PHILTOP

2003-2022 Toyota 4Runner 4.0L/4.7L/2.7L | Front Driver Side & Passenger Side CV Axle Shaft | 665235 - PHILTOP

Front

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4036SHA2751US

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
No
Quantity
2
Input Shaft Spline Count
30
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
30
Items Included
2x Front Cv Axle Shaft - 66-5235
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
665235

Highlights

  • Cv Axle Fitment: Front CV Joint for 2005-2020 Tacoma Base/Edicion Especial/Limited/SR/SR5/Sport/TRD Off-Road/TRD Pro/TRD Sport, 2003-2022 4Runner 4WD, 2010-2022 GX460, 2007-2014 FJ Cruiser 4WD, 2003-2009 GX470.
  • Reference Number: 665235, NCV69170, 4343060060
  • Drive Shaft Details: 2x Front cv axle shaft - 66-5235. Compressed Length: 25.38 inch. Output Shaft Spline Count: 30. Iutput Shaft Spline Count: 30.
  • Compatibility Verification: Please check the compatibility list on the listing page for more submodel details to make sure your exact model is included.
  • High Quality: CV shafts are made of high-quality chloroprene rubber for greater durability and longevity. High-quality grease can withstand high temperatures and high torque requirements, ensuring long-term reliable performance.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20222014 - 20222010 - 20222003 - 20092003 - 20222003 - 20092020 - 202120102003 - 20222003 - 20092018 - 20222003 - 20092003 - 20092017 - 20222018 - 20222015 - 202220222010 - 20162021 - 20222020 - 20212007 - 2014200720082005 - 20152005 - 20152016 - 20202016 - 20202016 - 20202016 - 20202016 - 20202016 - 20202017 - 20202016 - 2020
MakeLexusLexusLexusLexusToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyotaToyota
ModelGX460GX460GX460GX4704Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4Runner4RunnerFJ CruiserFJ CruiserFJ CruiserTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacomaTacoma
TrimBaseLuxuryPremiumBaseLimitedLimitedNightshadeSR5SR5SR5SR5 PremiumSportSportTRD Off-RoadTRD Off-Road PremiumTRD ProTRD SportTrailTrailVentureBaseTRD Special EditionTrail Teams Special EditionBaseBaseLimitedSRSRSR5SR5TRD Off-RoadTRD ProTRD Sport
Engine4.6L V84.6L V84.6L V84.7L V84.0L V64.7L V84.0L V62.7L L44.0L V64.7L V84.0L V64.0L V64.7L V84.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V64.0L V62.7L L44.0L V63.5L V62.7L L43.5L V62.7L L43.5L V63.5L V63.5L V63.5L V6
Note-----------------------
Standard Duty Replacement
Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement
Before 03/2020;Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.5/5

Based on 8 reviews

563%
425%
313%
20%
10%

Rhyme Rayburn

05/21/2025

Verified buyer

Great CV AXLE

Customer

11/10/2024

Verified buyer

No more clicking when I stear, thanks to the shafts. Read more

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.