2003-2005 Toyota 4Runner 4.0L V6 | 1 PC Front Right Brake Caliper w/Hanger | 192713 - PHILTOP

2003-2005 Toyota 4Runner 4.0L V6 | 1 PC Front Right Brake Caliper w/Hanger | 192713 - PHILTOP

Hanger Included

4-Piston Design

Built to Last

4.3

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
2617DBC1468US

Specifications

Brand
PHILTOP
Piston Count
4
Inlet Port Thread Size
M10x1.0
Bleeder Port Thread Size
M7x1.0
Bracket Included
No
Mounting Hardware Included
Yes
Quantity
1
Position
Front, Left
Color
Silver
Items Included
1x Front Left Caliper - 192713
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Steel
Piston Diameter
1.78 in
Warranty Period
2-Year
Part Number
192713

Highlights

  • [Vehicle Compatibility] The Front Left brake caliper fit for 1982-2003 S10, 1991-2003 Sonoma, 1982-1992 Camaro, 1978-1987 El Camino, 1978-1988 Monte Carlo, 1982-1992 Firebird, 1978-1988 Cutlass Supr-eme, 1978-1987 Regal, 1983-1994 S10 Blazer, 1982-1990 S15, 1978-1983 Malibu, 1995-1997 Blazer, 1996-2000 Hombre, 1978-1987 Caballero, 1978-1987 Grand Prix, 1992-1997 Jimmy, 1978-1984 Cutlass Calais, 1978-1987 Cutlass Salon, 1983-1991 S15 Jimmy, 1982-1986 Bonneville, 1968-1985 II, 1978-1981 Cutlass, 1978-1981 Century, 1978-1981 LeMans
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 18-B4071, 18B4071, 184071, 18005263, 8180232820, 8180161560, 18010481, 18016156, 18023282, 12321439, 12321426, 12300227, 1155098, 8180262960, 8123700160, 18026296, 12510019, 12376257
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Good Quality] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2003 - 20052003 - 20052003 - 20052003 - 20052003 - 20052003 - 2005
MakeToyotaToyotaToyotaToyotaToyotaToyota
Model4Runner4Runner4Runner4Runner4Runner4Runner
TrimLimitedLimitedSR5SR5SportSport
Engine4.0L V64.7L V84.0L V64.7L V84.0L V64.7L V8
Note
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL
Casting # 13WL

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake caliper

Reviews

4.3/5

Based on 4 reviews

550%
425%
325%
20%
10%

SarahDrives_776

01/18/2026

Installation was a breeze, everything lined up perfectly. And I was shocked at how quick the delivery was, had it on my doorstep in just a couple of days.

AutoMom_2019_50

03/25/2026

My old caliper was shot, making all sorts of noises. Replaced it with this one and wow, what a difference! The braking feels so much more responsive now, like a whole new truck.

FAQS

Stop the installation and contact Philtop customer support. Please provide your vehicle information, order number and photos of the original and received parts so we can help review the fitment.

Many electronic parking-brake systems require a service mode before the rear caliper is removed or the piston is retracted. Follow the vehicle-specific procedure.

Before driving, press the brake pedal firmly several times until it feels firm, to seat the pads against the rotor.Confirm all fasteners and hose connections are secure, bleed the system as required, check for leaks, verify a firm pedal, and make sure each wheel rotates as expected before normal driving.