2008-2011 Ford Focus 2.0L L4 | 1 PC Front Right Brake Caliper w/Bracket w/Hanger | 18B5069 - PHILTOP

2008-2011 Ford Focus 2.0L L4 | 1 PC Front Right Brake Caliper w/Bracket w/Hanger | 18B5069 - PHILTOP

Hanger Included

Bracket Included

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
1350DBC491GUS

Specifications

Brand
PHILTOP
Piston Count
1
Inlet Port Thread Size
M10x1.5
Bleeder Port Thread Size
M10x1.0
Bracket Included
Yes
Mounting Hardware Included
Yes
Quantity
1
Position
Front, Right
Color
Silver
Items Included
1x Front Right Caliper - 18B5069
Surface Finish
Zinc Plated
Material
Steel
Piston Material
Phenolic
Piston Diameter
2.25 in
Warranty Period
2-Year
Part Number
18B5069

Highlights

  • [Vehicle Compatibility] The Front Right brake caliper fit for 2008-2011 Focus
  • [Perfect Fit] OE specification disc brake caliper assembly, including brake caliper, bracket, phenolic piston, mounting hardware. OE Replcement Number: 18-B5069, 18B5069, 185069, 8S4Z2001AA, 8S4Z2B120B, 8S4Z2B120BA, 8S4Z2B292A, 9S4Z2001AA
  • [Ductile Iron] PHILTOP brake caliper cover is made of ductile iron. It has strong heat resistance and is not easy to deform or break
  • [Quality Pass] The quality and production process are certified by IATF16949. Each product is tested for high and low pressure sealing before leaving the factory
  • [Galvanizing Process] The surface of the caliper adopts refined galvanizing process, which has excellent anti-rust and environmental protection performance

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2008 - 20112008 - 20112009 - 20112008 - 2011
MakeFordFordFordFord
ModelFocusFocusFocusFocus
TrimSSESELSES
Engine2.0L L42.0L L42.0L L42.0L L4
Note----

How to Install?

Installation Manual Download

User manual (PDF)
Download

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise the vehicle, support it with jack stands, and remove the wheel.
  • Step-2: Remove the Old Caliper: Loosen the brake-line fitting and cap the open line immediately. Remove the guide-pin bolts and caliper; Support the caliper with a caliper hanger or strong wire. Never let it hang from the brake hose.
  • Step-3: Inspect Related Components: Check the brake pads, rotor, guide pins, hose and piston. Replace seized, damaged or heavily worn components.
  • Step-4: Install the New Caliper: Install the bracket and brake pads. Apply high-temperature brake grease to the guide pins, mount the caliper, and hand-start all bolts.
  • Step-5: Reconnect and Torque: Install new copper washers, reconnect the brake hose, and tighten the bracket bolts, guide-pin bolts and line fitting to the vehicle manufacturer’s specified torque.
  • Step-6: Refill and Bleed the Brakes: Fill with the specified brake fluid and bleed the brake system in the sequence stated in the vehicle service manual. Keep the reservoir above MIN throughout the process. ABS/ESP vehicles may require a scan tool to cycle the pump.
  • Step-7: Reinstall the Wheel: Install the wheel, tighten the lug nuts in a star pattern, lower the vehicle, and torque the lug nuts to specification.

After Installation

  • Pump the brake pedal repeatedly until it feels firm before moving the vehicle.
  • Check the guide-pin bolts, bracket bolts and brake-line fitting.
  • Inspect all connections for brake-fluid leaks and confirm the fluid level.
  • Perform a low-speed road test and confirm straight, quiet braking.
  • Make sure the brake and ABS warning lights are off.
  • Recheck for leaks and retorque the lug nuts after the road test.
  • Avoid hard braking during the first 200–300 km (120–180 miles).

Product Video

Product Description

brake caliperbrake calipers

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

SarahDrives_121

11/27/2025

The shipping was lightning fast, got it the very next day! Installing this caliper was super easy, everything lined up perfectly. Definitely a smooth and quick repair job.

RickFixIt_969

02/27/2026

My Focus was pulling to the side, but this new caliper fixed it completely. The braking is now smooth and consistent. Feels like a brand new car on the road.

FAQS

Installed or modified products may require additional review and may not qualify for a standard return. Please contact Philtop before removing or returning the product.

Brake calipers are commonly position-specific. Confirm the axle and side shown in the product specifications before installation.

A single caliper may be replaced when only one side has failed, but the opposite caliper, pads, rotors, hoses, and slide components should also be inspected for uneven operation or wear.