2013-2018 Ford Focus 2.0L/1.0L | Front Shock Absorbers Struts w/Sway Bar link, w/Spring | 172908 - PHILTOP

2013-2018 Ford Focus 2.0L/1.0L | Front Shock Absorbers Struts w/Sway Bar link, w/Spring | 172908 - PHILTOP

Front

Strut & Coil Spring Shock Assemblies Sway Bar Link Kits

Sway Bar Included

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
81ISSAA22W7US

Specifications

Brand
PHILTOP
Items Included
2x Front Complete Strut Assembly-172907/172908 2x Sway Bar Link Kits-K750554*2
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Strut & Coil Spring Shock Assemblies Sway Bar Link Kits
Quantity
4
Position
Front
Oil Seal Material
Nitrile Rubber
Warranty Period
2-Year
Part Number
172908,172907

Highlights

  • Reference Number(s): Replace 172907, BV6Z18124F, BV6Z18124G, BV6Z18124E, CV6Z18124Z, 172908, BV6Z18124C, CV6Z18124Y, BV6Z18124D, BV6Z18124H
  • Fitment:Shock Absorbers & Sway Bar Link Kits 4 set Compatible With 2013-2018 Ford Focus SE 2.0L 2013-2018 Ford Focus Titanium 2.0L 2013-2018 Ford Focus S 2.0L 2015-2018 Ford Focus SE 1.0T 2013-2018 Ford Focus Electric -
  • Package Includes: 2x Front Complete Strut Assembly-172907/172908,2x Sway Bar link kits-K750554*2
  • Quality meets or exceeds OEM performance.Install the original car suspension Strut directly without modification.Improve vehicle performance even under the extreme weather with low noise, less friction and long lifespan.
  • Buy with Confidence: PHILTOP offers a ten-year unlimited-mileage guarantee on our meticulously crafted suspension shock strut assembly&sway bar link kits. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20132014 - 201820132014 - 20182015 - 201820132014 - 201820132014 - 2018
MakeFordFordFordFordFordFordFordFordFord
ModelFocusFocusFocusFocusFocusFocusFocusFocusFocus
TrimElectricElectricSSSESESETitaniumTitanium
Engine--2.0L L42.0L L41.0L L32.0L L42.0L L42.0L L42.0L L4
Note
From 02/04/2013;Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement
From 02/04/2013;Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement
From 02/04/2013;Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement
From 02/04/2013;Recommended OE Application -Specific Replacement
Recommended OE Application -Specific Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Purchase & Installation Notice

  • Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
  • For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
  • For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.

Installation Steps

  • Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
  • Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
  • Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
  • Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
  • Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
  • Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.

Product Description

1

Reviews

4.5/5

Based on 4 reviews

550%
450%
30%
20%
10%

Brad_AutoParts_448

04/07/2026

These look really nice, very clean and professional. For the price point, the quality is outstanding. Feels like I got a steal of a deal, and my car handles much better now. Highly recommend.

Brad_AutoParts_469

03/29/2026

Installation was surprisingly straightforward. Everything lined up perfectly, and I didn't run into any major issues. These feel way more robust than the cheap ones I bought last time, definitely worth the effort.

FAQS

No FAQs have been added for this product yet.

2013-2018 Ford Focus Front Shock Absorbers Struts w/Sway Bar link, w/Spring | 172908 | PHILTOP