2011-2013 Kia Sorento 2.4L/3.5L | Front Driver Side & Passenger Side CV Axle 25.81in/23.56in | 663654 - PHILTOP

2011-2013 Kia Sorento 2.4L/3.5L | Front Driver Side & Passenger Side CV Axle 25.81in/23.56in | 663654 - PHILTOP

Front

Built to Last

5.0

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
6254SHA756NUS

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
Yes
Quantity
2
Input Shaft Spline Count
28/28
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
30/30
Items Included
1x Front Cv Axle Shaft - 66-3653 1x Front Cv Axle Shaft - 66-3654
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
663654,663653

Highlights

  • Fitment: Front CV Axle Assembly Fit for 2010-2012 Santa Fe.
  • Function: CV axles are the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward. A good CV axle assembly makes for a smoother ride.
  • Easy to install: Brand-new constant velocity universal joint drive shaft. Both threads and splines are precision-rolled, enabling direct and effortless replacement.
  • Reliable Quality: Our CV shaft assemblies are manufactured to OE specifications and quality standards under the direction of a professional OEM manufacturer. All half shafts are factory tested for reliability, durability and performance.
  • Adaptation Validation: Before purchasing a half shaft, please confirm that the product is suitable for your vehicle by using the fit verification guide provided by Suncentauto.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2010 - 20122011 - 20122010 - 20122010 - 20122010 - 201220122011 - 20132011 - 20132011 - 20132011 - 20132011 - 2013
MakeHyundaiHyundaiHyundaiHyundaiHyundaiKiaKiaKiaKiaKiaKia
ModelSanta FeSanta FeSanta FeSanta FeSanta FeSorentoSorentoSorentoSorentoSorentoSorento
TrimGLSGLSLimitedLimitedSEBaseEXEXLXLXSX
Engine2.4L L43.5L V62.4L L43.5L V63.5L V62.4L L42.4L L43.5L V62.4L L43.5L V63.5L V6
Note-----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

5.0/5

Based on 38 reviews

595%
45%
30%
20%
10%

Robert Samson

09/20/2026

Verified buyer

The delivery was great and it fits

Tyrell T

09/20/2026

Verified buyer

I’ve had these on my car for the past 3 months and so far no issues. Will be again I. The future.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.