2007-2023 Dodge Charger 3.6L | Front Driver Side & Passenger Side CV Axle Shaft | 663557 - PHILTOP

2007-2023 Dodge Charger 3.6L | Front Driver Side & Passenger Side CV Axle Shaft | 663557 - PHILTOP

Front

Built to Last

4.4

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
5915SHA415DUS

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
Yes
Quantity
2
Input Shaft Spline Count
34
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
27
Items Included
1x Front Cv Axle Shaft - 66-3557 1x Front Cv Axle Shaft - 66-3558
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
663557,663558

Highlights

  • Vehicle Fitment: Front 66-3557 66-3558 Axle Shaft for 2007-2023 Charger AWD, 2005-2023 300 AWD, 2017-2023 Challenger AWD, 2005-2008 Magnum AWD.
  • CV Joint OE Number: 663558, APCVA1397, 66-3557, 4578601AA, 4578600AA, 66-3558, NCV12509, NCV12508, 663557.
  • High Quality: Half shafts are normalized to ensure product stability.The cv shafts are also ground to improve the ball path and ball surface finish to prolong the product life.
  • Factory Testing: All cv axle shafts undergo a triple factory inspection as a means of confirming product accuracy.Our Axle shafts remain in great condition under extreme conditions.
  • Purchase Verification: Before purchasing, please confirm that the cv axle will fit your vehicle by entering 'Year-Make-Model' through the Suncentauto adapter.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2013 - 20142013 - 20172005 - 20182013 - 20142012 - 20142015 - 20172015 - 20172005 - 201020122015 - 202020102012 - 202020102012 - 2020200920102005 - 20102018 - 20232018 - 20232017 - 20232019 - 202320182020 - 202320182014 - 20232014 - 20232007 - 20142007 - 20102007 - 20102013 - 20172008 - 201020132007 - 20102012 - 20172019 - 202320122005 - 2008200720072005 - 2008
MakeChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerChryslerDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodgeDodge
Model300300300300300300300300300300300300300300300300300300300ChallengerChallengerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerChargerMagnumMagnumMagnumMagnum
TrimBaseCCC LuxuryC LuxuryC PlatinumC PlatinumLimitedLimitedLimitedSSSSSignature SeriesTouringTouringTouringTouring LGTSXTGTGTGT PlusPursuitPursuitR/TSESESESESESXTSXTSXTSXT PlusR/TSESESXT
Engine3.6L V63.6L V65.7L V83.6L V65.7L V83.6L V65.7L V83.5L V63.6L V63.6L V63.5L V63.6L V65.7L V85.7L V83.5L V62.7L V63.5L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V63.6L V65.7L V85.7L V82.7L V63.5L V63.6L V65.7L V85.7L V83.5L V63.6L V63.6L V63.6L V65.7L V82.7L V63.5L V63.5L V6
Note----------------------------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.4/5

Based on 5 reviews

560%
420%
320%
20%
10%

Tom_Handy_896

04/17/2026

These Magnum axles are really well-made and feel very durable. Got them at a great price too. My ride is so much smoother and quieter now. Definitely a worthwhile upgrade.

SarahDrives_133

01/08/2026

My Challenger was vibrating pretty badly during acceleration. After putting these on, it's like a whole new car! Smooth, quiet, and confident. Exactly what I was hoping for.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.