2000-2005 Honda TRX350FM FourTrax Rancher 4X4 | Front Driver & Passenger Side ATV/UTV Compatible CV Axle| HON7005 - PHILTOP

2000-2005 Honda TRX350FM FourTrax Rancher 4X4 | Front Driver & Passenger Side ATV/UTV Compatible CV Axle| HON7005 - PHILTOP

Front

Built to Last

4.5

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8768SHA2409US

Specifications

Brand
PHILTOP
Position
Front
ABS Ring Included
No
Quantity
2
Input Shaft Spline Count
20
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
21
Items Included
2x Front Cv Axle Shaft
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
HON7005

Highlights

  • VEHICLE FIT: Front CV Axle Shafts compatible with 2000-2005 Honda TRX350FE FourTrax Rancher 4x4 ES, 2000-2005 Honda TRX350FM FourTrax Rancher 4X4, 2007-2013 Honda TRX420FM FourTrax Rancher 4X4, 2007-2013 Honda TRX420FE FourTrax Rancher 4X4 ES, 2009-2014 Honda TRX420FA Rancher AT, 2009-2014 Honda TRX420FPA Rancher AT 4x4 w/ Power Steering, 2009-2013 Honda TRX420FPE Rancher ES 4x4 w/ Power Steering, 2009-2013 Honda TRX420FPM Rancher 4x4 w/ Power Steering
  • Reference Numbers: 42250HN5671,ATVHO8306,42350HN5671,HON7005,4123003,PAXL4007HD,PAXL4007,02141625,AX7205,ATVHO8219,ATVHO8120,ATVHO7306HALFSHAFT cv axle shaft
  • Reliably: Enjoy a smoother, more reliable ride with our high-quality CV Axle Shaft. Premium materials and excellent performance provide dependable support for your daily driving needs.
  • Superior Quality Build:Half shafts normalized & one-piece treated for extended service life. Heat-treated components resist wear, corrosion, and impact damage.
  • Purchase Verification: Before ordering this CV Axle Shaft Assembly, check the compatibility list on the details page or use Suncentauto's fitment filter by entering your Year-Make-Model.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2000 - 20052000 - 20052009 - 20142007 - 20132007 - 20132009 - 20142009 - 20132009 - 2013
MakeHondaHondaHondaHondaHondaHondaHondaHonda
ModelTRX350FE FourTrax Rancher 4x4 ESTRX350FM FourTrax Rancher 4X4TRX420FA Rancher ATTRX420FE FourTrax Rancher 4X4 ESTRX420FM FourTrax Rancher 4X4TRX420FPA Rancher AT 4x4 w/ Power SteeringTRX420FPE Rancher ES 4x4 w/ Power SteeringTRX420FPM Rancher 4x4 w/ Power Steering
TrimBaseBaseBaseBaseBaseBaseBaseBase
Engine--------
Note
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement
Standard Duty Replacement

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

13

Reviews

4.5/5

Based on 2 reviews

550%
450%
30%
20%
10%

Steve_DIYer_694

01/01/2026

Came super fast and was easy to put on. Everything lined up perfectly and the price was excellent. Couldn't be happier.

Nancy_FirstCar_80

04/21/2026

It works fine and the price was good. The instructions included were a little vague though, took me a bit longer to figure out than it should have.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.