Dr. DWC
10/11/2026
Verified buyer
I work as an auto technician and frequently service eighth-generation Honda Accords. A customer brought in a 2010 Accord with noticeable front-end vibration under moderate acceleration between forty and sixty miles per hour. Inspection on the lift showed torn inner rubber boots on both front drive axles, with dried grease and significant play inside the tripod joints. I installed this PHILTOP pair of front CV axle assemblies, part numbers 66-4254 and 66-4255, to resolve the issue.Removing the old axles involves popping the lower ball joints and swinging the steering knuckles aside. The splines on both new axles matched the factory Honda specifications precisely. The driver-side axle seated directly into the transaxle case, and the retaining C-clip engaged with a firm snap. The passenger-side shaft slotted through the intermediate half-shaft carrier bearing without resistance. Both outer splines slid into the wheel hubs easily, and the supplied axle nuts torqued down and staked into the shaft keyways cleanly.The build quality of these assemblies is solid. The neoprene boots are heavy-duty and secured with tight stainless steel bands that keep the grease sealed. The internal joints rotate smoothly without tight spots or excessive radial lash. The ABS tone rings and sealing surfaces lined up with the factory knuckle sensors without triggering any warning indicators.During the post-installation road test, the acceleration vibration vanished completely. The car drives quietly under heavy throttle, and turning tight circles in parking lots produced zero clicking or binding noises. Cruising at highway speeds is smooth and steady. These axles restored original driving dynamics to the vehicle without the high price of dealership replacements.




