2008-2012 Audi A5 Quattro 2.0L/3.2L | Front Driver Side & Passenger Side CV Axle | 667386 - PHILTOP

2008-2012 Audi A5 Quattro 2.0L/3.2L | Front Driver Side & Passenger Side CV Axle | 667386 - PHILTOP

Front Left or Right

Built to Last

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
4520SHA664MUS

Specifications

Brand
PHILTOP
Position
Front Left or Right
ABS Ring Included
No
Quantity
1
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
42
Items Included
1x Front Left or Right Cv Axle Shaft - 66-7386
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
667386

Highlights

  • Fitment: Front CV Axle Drive Shaft for A4 Quattro 2010-2011, A5 Quattro 2008-2012, A4 Quattro 2009 2.0T, A4 Quattro 2009 3.2L. Please use the filters to confirm that the half shaft fits your vehicle.
  • OE NUM: 8K0407271P, APCVA969, 667386, NCV23906, 66-7386, 607386, 60-7386.CV axle drive shafts utilize proprietary engineering designed to smoothly transmit torque at constant speeds to ensure they meet the form, fit and function requirements of the original half shafts.
  • Function: CV axles are the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward. A good CV axle assembly makes for a smoother ride.
  • High Quality: The cv axle shafts are made of high quality materials with strong corrosion resistance, which improves the reliability and performance of the cv axle assembly.
  • Easy to install: Brand new cv axle shaft. Threads and splines are precision rolled for easy direct replacement.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20112009 - 201120092010 - 20122008 - 20102010 - 2012
MakeAudiAudiAudiAudiAudiAudi
ModelA4 QuattroA4 QuattroA4 QuattroA5 QuattroA5 QuattroA5 Quattro
TrimAvantBaseBaseBaseBaseCabriolet
Engine2.0L L42.0L L43.2L V62.0L L43.2L V62.0L L4
Note------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

12

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Customer photos and videos

Justin J. SlomskiJustin J. Slomski

11/06/2025

Verified buyer

So far, 10/10. 2009 a4 avant 2.0t quattro

Brad_AutoParts_311

03/01/2026

Super fast shipping, got here quicker than I expected. Installation was a breeze, everything fit perfectly. Couldn't ask for more, definitely recommend this for your Audi.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.