2007-2008 INFINITI G35 3.5L V6 | Front Driver Side CV Axle Shaft | 666283 - PHILTOP

2007-2008 INFINITI G35 3.5L V6 | Front Driver Side CV Axle Shaft | 666283 - PHILTOP

Front Left

Built to Last

4.9

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7427SHA6339US

Specifications

Brand
PHILTOP
Position
Front Left
ABS Ring Included
No
Quantity
1
Material
SAE 1055 Steel and Chloroprene Rubber
Output Shaft Spline Count
27
Items Included
1x Front Left Cv Axle Shaft - 66-6283
Axle Nut Included
Yes
Warranty Period
2-Year
Part Number
666283

Highlights

  • Compatibility: 24.69 inch CV Axles for 2007-2008 G35 AWD, 2009-2013 G37 AWD Sedan, 2011-2012 G25 AWD.
  • Reference Number: 666283, 39101JK500.
  • Smooth Power Transfer: Our constant velocity joints seamlessly transmit engine power to the wheels. They effectively adapt to steering maneuvers during driving, maintaining stable performance even when turning or changing lanes.
  • Sealed Protection: Premium rubber boots tightly encapsulate the constant velocity joints and drive shafts, blocking dust, moisture, and debris intrusion to extend front drive shaft lifespan.
  • Easy Installation: The drive shaft is designed to strictly adhere to OEM specifications, ensuring precise dimensional compatibility with various vehicle models. This allows for quick replacement of aged or damaged components.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2011 - 20122007 - 20082009 - 2013
MakeINFINITIINFINITIINFINITI
ModelG25G35G37
TrimXXX
Engine2.5L V63.5L V63.7L V6
Note---

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the vehicle, installation position, spline counts, mounting points and ABS components match.
  • Inspect the hub bearing, suspension parts, transmission mount and axle seal. Repair looseness, damage or leakage first.
  • Compare the new and original axles in a fully compressed position. Confirm the compressed length and key dimensions match.
    Verify that the new and original CV axles have the same compressed length
  • Check that the boots, clamps, splines and supplied axle nut are complete and undamaged.
  • Support both CV joints when handling. Do not pull, sharply bend or carry the axle by its rubber boot.
    The correct way to hold a CV axle

Installation Steps

  • Step-1: Secure the Vehicle: Loosen the axle nut with the wheels on the ground. Raise the vehicle on a level surface and support it securely with jack stands.
  • Step-2: Remove the Old Axle: Remove the wheel and necessary suspension components. Separate the outer spline from the hub with the proper puller.
  • Step-3: Release the Inner Joint: Use a CV joint puller or slide hammer. Never strike the axle directly or pull it out with bolts. Be prepared for possible transmission-fluid loss.
  • Step-4: Install the New Axle: Clean the splines and seal-contact surface. Insert the inner joint straight into the transmission until the retaining ring fully locks, then install the outer spline into the hub.
  • Step-5: Reassemble and Torque: Reinstall all suspension components and use a new axle nut. Hand-start the fasteners and tighten everything to the vehicle manufacturer’s specified torque.
  • Step-6: Final Assembly: Reinstall the wheel, torque the lug nuts in a crisscross pattern and check or refill the specified transmission fluid if required.

After Installation

  • Confirm the inner joint is fully seated and all fasteners are secure.
  • Check the CV boots, clamps and axle seal for damage or leakage.
  • Rotate the wheel by hand and verify the axle moves smoothly without binding or contacting nearby components.
  • Perform a low-speed road test. Check for clicking while turning, clunking during acceleration, vibration and fluid leakage.
  • If suspension geometry was disturbed, have the wheel alignment checked.

Product Video

Product Description

Reviews

4.9/5

Based on 7 reviews

586%
414%
30%
20%
10%

Customer photos and videos

ChrisChris

09/17/2026

Verified buyer

This front left CV axle was a straightforward replacement for my Infiniti. The fit was good, and the assembly felt solid and well made compared with the worn original. Installation went smoothly with the proper tools, and everything lined up as expected. After installation, the vehicle drove smoothly without the clicking and vibration I was experiencing from the old axle. Overall, a good replacement part that restored confidence in the front drivetrain.

David GomesDavid Gomes

09/13/2026

Verified buyer

Received quickly and well packaged. Feels and looks like a quality part. Already installed on my 2007 Infiniti g35. Installation is a little tricky because of where the bolts are located, but that’s not the parts fault. Once old part was taken off this was fairly easy to install. I would recommend.

FAQS

Fitment depends on the engine, transmission, and whether your car has ABS. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a match.

Most CV axles are side-specific due to different lengths. Please check the "Placement on Vehicle" section in our specifications table to ensure you are ordering the correct side for your repair.

The number of teeth (splines) on the ends must match exactly. Please refer to the "Technical Specifications" on this page to verify the Inner and Outer Spline counts before purchasing.