WIDELY COMPATIBLE: PHILTOP Complete Struts Replacement for F150 2009 2010 2011 2012 2013. OE Part Number: 171141*2 SAA694. Meet OE Standards, please Comfirm our products are compatible with your car
OE-QUALITY, VEHICLE-SPECIFIC DESIGH: Application specific coil spring, mount and strut feature an OE-style design to ensure an optimized ride and handling experience unique to each vehicle profile. #OE# 171141*2
STABLE DRIVE: Our shock absorbers provide stability and strong damping for a comfortable experience for both passenger and driver. Driving on steep roads is not a problem either. We are committed to providing our customers with a perfect driving experience
100% RECOVERY PERFORMANCE: Worn-out struts increase stopping distance by 20%. Shorten the braking distance and enhance the safety distance after replacing the PHILTOP struts assembly. Increase steering responsiveness, minimize stopping distance, and boost your driving confidence.
IMPROVE TIRE GRIP: By raising the spring stiffness coefficient, the wheel's quick vibration is reduced, the tire is kept from leaving the road, and exercise stability is enhanced. Damping rods lessen body vibration and bounce by creating resistance through fluid flow to absorb or slow down the direct effect of energy.
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
4.3/5
Based on 3 reviews
5
67%
4
0%
3
33%
2
0%
1
0%
J
Jennifer_Auto_581
12/04/2025
Shipping was quick and the parts arrived well-packaged. Installation was straightforward, everything fit as it should. Big improvement over my old worn-out struts. Couldn't be happier with the ease of installation and delivery speed.
J
Jennifer_Auto_235
10/18/2025
Seriously impressed with the build quality on these. They feel substantial and well-made. Compared to other options out there, the price is unbeatable for what you get. Definitely a great bang for your buck.
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2009-2013 Ford F-150 3.5L V6 | Front Shock Absorber w/Spring | OE#9L3Z18124DE/171141 - PHILTOP
Front
Complete Strut & Coil Spring Assembly
SKU:
1380SAA6945US
4.3
$231.21$23121
Check if this fits your vehicle
Select a vehicle to check this product.
Items Included
2x Front Strut & Coil Spring Shock Assemblies - 171141
Color
Black
Steel Tube Material
Mild Steel(ST37 Equivalent)
Bump Stop Included
Polyurethane
Piston Rod Material
SAE 1045 Steel
Type
Complete Strut & Coil Spring Assembly
Quantity
2
Position
Front
WIDELY COMPATIBLE: PHILTOP Complete Struts Replacement for F150 2009 2010 2011 2012 2013. OE Part Number: 171141*2 SAA694. Meet OE Standards, please Comfirm our products are compatible with your car
OE-QUALITY, VEHICLE-SPECIFIC DESIGH: Application specific coil spring, mount and strut feature an OE-style design to ensure an optimized ride and handling experience unique to each vehicle profile. #OE# 171141*2
STABLE DRIVE: Our shock absorbers provide stability and strong damping for a comfortable experience for both passenger and driver. Driving on steep roads is not a problem either. We are committed to providing our customers with a perfect driving experience
100% RECOVERY PERFORMANCE: Worn-out struts increase stopping distance by 20%. Shorten the braking distance and enhance the safety distance after replacing the PHILTOP struts assembly. Increase steering responsiveness, minimize stopping distance, and boost your driving confidence.
IMPROVE TIRE GRIP: By raising the spring stiffness coefficient, the wheel's quick vibration is reduced, the tire is kept from leaving the road, and exercise stability is enhanced. Damping rods lessen body vibration and bounce by creating resistance through fluid flow to absorb or slow down the direct effect of energy.
4.3
3 reviews
5 star: 2
3 star: 1
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2011 - 2013
Ford
F-150
FX4
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
FX4
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
FX4
5.4L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
King Ranch
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
King Ranch
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
King Ranch
5.4L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
Lariat
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
Lariat
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
Lariat
5.4L V8
Recommended OE Application -Specific Replacement
2013
Ford
F-150
Limited
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
Platinum
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
Platinum
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
Platinum
5.4L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
STX
3.7L V6
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
STX
4.6L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
STX
5.0L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XL
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XL
3.7L V6
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
XL
4.6L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XL
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
XL
5.4L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XLT
3.5L V6
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XLT
3.7L V6
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
XLT
4.6L V8
Recommended OE Application -Specific Replacement
2011 - 2013
Ford
F-150
XLT
5.0L V8
Recommended OE Application -Specific Replacement
2009 - 2010
Ford
F-150
XLT
5.4L V8
Recommended OE Application -Specific Replacement
Product Specifications
Brand
PHILTOP
Items Included
2x Front Strut & Coil Spring Shock Assemblies - 171141
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
4.3/5
Based on 3 reviews
5
67%
4
0%
3
33%
2
0%
1
0%
J
Jennifer_Auto_581
Dec 04,2025
Shipping was quick and the parts arrived well-packaged. Installation was straightforward, everything fit as it should. Big improvement over my old worn-out struts. Couldn't be happier with the ease of installation and delivery speed.
J
Jennifer_Auto_235
Oct 18,2025
Seriously impressed with the build quality on these. They feel substantial and well-made. Compared to other options out there, the price is unbeatable for what you get. Definitely a great bang for your buck.
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.