PHILTOP Front Lower Ball Joint Control Arm Sway Bar End Link Tie Rod End Boots & Bellows w/Locking C-Clamps Fit For 2002-200

PHILTOP Front Lower Ball Joint Control Arm Sway Bar End Link Tie Rod End Boots & Bellows w/Locking C-Clamps Fit For 2002-200

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.6

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
9438CAK510XUS

Specifications

Brand
PHILTOP
Items Included
1x Front Lower Right Side Control Arm - K642725 1x Front Lower Left Side Control Arm - K642726 1x Front Lower Left (Driver) Side Suspension Ball Joint - K90346 1x Front Lower Right (Passenger) Side Suspension Ball Joint - K90347 2x Front Driver & Passenger Side Sway Bar End Link - K90344 2x Rear Driver & Passenger Side Sway Bar End Link - K90345 1x Front Driver Side Outer Tie Rod End - ES3600 1x Front Passenger Side Outer Tie Rod End - ES3601 2x Front Drive & Passenger Side Inner Tie Rod End - EV420 2x Rack & Pinion Tie Rod Boots & Bellows W/ Locking C-Clamps
Quantity
14
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
4806906070,4806933050,4806906080,4806906100,4806933060,4806928120,4806958010,4806906140,4806906180,4334009010S1,4333009010,4806806070,4882006040,4882028050,4334009010,4806906150,4806806100,4334009080,4334029175,4333029405,4333009560,4333009160,4334029215,4333029615,4883048010,48830AA010,4547029185,4883006030,4547039215,4550339225,4550309230,480690E010,4546039615,480680E010,4546029425
Part Number
K90344,K90346,K90347,K90345,EV420,RK620333,RK620334,ES3600,ES3601,MK90344,MK90346,MK90347,ES3652,4547009010,TC1513,4546009010,TC1515,MK90345,MEV420,TC8135,MES3601,MES3600,ES3648,TC1514,GS20246,GK90347,GK90346,527004,527003,GK90344,CB74204PR,CB74203,CB74203PR,CA74414,CA74414PR,524154,B90346XL,B90347XL,SK90344XL,K200041,TYF608,TYF606,TYL611,JBU866

Highlights

  • #77,498 in Automotive (See Top 100 in Automotive)
  • #180 in Automotive Replacement Control Arms
  • Fitment: Fit for Toyota Camry/ES300 2002-2003
  • OE Number: Control Arms Suspension Kit for K620334 K620333 K90346 K90347 K90344 K90345 ES3600 ES3601 EV420
  • Built to Last: Features a rugged steel body with an advanced anti-corrosion coating for long-lasting structural integrity
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 20032002 - 2003
MakeLexusToyotaToyotaToyotaToyotaToyotaToyota
ModelES300CamryCamryCamryCamryCamryCamry
TrimBaseLELESESEXLEXLE
Engine3.0L V62.4L L43.0L V62.4L L43.0L V62.4L L43.0L V6
Note-------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.6/5

Based on 7 reviews

571%
414%
314%
20%
10%

Rina gonzalez

08/21/2026

Verified buyer

Es un material muy bueno se lo puse a miCarro hace meses y está aún comoNuevo

DaveTheMechanic_639

04/22/2026

This kit was a lifesaver! My steering felt loose, and these components fixed it perfectly. The car feels much more stable and responsive now. Installation was simple and effective.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.

PHILTOP Front Lower Ball Joint Control Arm Sway Bar End Link Tie Rod End Boots & Bellows w/Locking C-Clamps Fit For 2002-200