2007-2012 Nissan Versa 1.6L L4 | 10 PC Front Lower Control Arm | OE#D8520EW00A/K750098 - PHILTOP

2007-2012 Nissan Versa 1.6L L4 | 10 PC Front Lower Control Arm | OE#D8520EW00A/K750098 - PHILTOP

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
8740CAK481KUS

Specifications

Brand
PHILTOP
Items Included
1x Front Driver Lower Control Arm with Ball Joint Attached – K620567 1x Front Passenger Lower Control Arm with Ball Joint Attached – K620566 2x Front Sway Bar/ Stabilizer Links Set – K750098 2x Rack and Pinion Boot Set – Bt 1x Front Driver Outer Tie Rod End – ES800248 1x Front Passenger Outer Tie Rod End – ES800249 2x Front Inner Tie Rod Ends Set – EV800322
Quantity
10
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
OE Number
D8520EW00A,485213U010,486271U61A,486471U61A,54618JX00A,54500EL000,54501EL000,546189U00A,546181FE0A,545011FU0A,545011FU0B,545001FU0B,545001FU0A,545011JY0A,545001JY0A,54501EW000,54500EW000,54500EL00A,54501EL00A,54500EL00D,54501EL00D,D8640EW00A,485213U025,486403U025,485203U025
Part Number
K750098,ES800249,ES800248,EV800322,RK620567,RK620566,TA2450,TA3029,JTE7605,GS30701,TI69030XL,TI45190,1018136

Highlights

  • #77,517 in Automotive (See Top 100 in Automotive)
  • #180 in Automotive Replacement Control Arms
  • Fitment: Fit for Nissan Versa 2007-2011, Fit for Nissan Versa 1.8L 2012, Fit for Nissan Cube 2009-2014
  • OE Number: Control Arms Suspension Kit for K620567 K620566 K750098 ES800248 ES800249 EV800322
  • Built to Last: Features a rugged steel body with an advanced anti-corrosion coating for long-lasting structural integrity
  • Easy Installation: Precision tolerances for easy installation on all parts. Control arm has steering alignment that ensure you a perfect work
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2009 - 20122009 - 20112009 - 20142009 - 20142009 - 20112009 - 2011201220122007 - 20112007 - 2011
MakeNissanNissanNissanNissanNissanNissanNissanNissanNissanNissan
ModelCubeCubeCubeCubeVersaVersaVersaVersaVersaVersa
TrimBaseKromSSL1.61.6 Base1.8 S1.8 SLSSL
Engine1.8L L41.8L L41.8L L41.8L L41.6L L41.6L L41.8L L41.8L L41.8L L41.8L L4
Note----------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.8/5

Based on 4 reviews

575%
425%
30%
20%
10%

Tom_Handy_667

11/21/2025

Super fast shipping, got here in just a couple of days. Installation was a breeze, everything lined up perfectly. Couldn't ask for a better experience.

Emma_DailyCommute_397

03/13/2026

My Versa was riding rough and making clunks. This kit fixed it right up, now it drives smooth and handles like new again. So glad I replaced the old parts.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.

2007-2012 Nissan Versa Control Arm 10 PC Front Lower | D8520EW00A | PHILTOP