PHILTOP Front Lower Control Arms Fit for Mariner 2005-2011, Tribute 2008-2011, Tribute 2005-2006, Escape 2004-2012 2.5L, Suspens

PHILTOP Front Lower Control Arms Fit for Mariner 2005-2011, Tribute 2008-2011, Tribute 2005-2006, Escape 2004-2012 2.5L, Suspens

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.8

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7001CAK296CUS

Specifications

Brand
PHILTOP
Items Included
1x Front Left Lower Control Arm W/Ball Joint Assembly - K80400 1x Front Right Lower Control Arm W/Ball Joint Assembly - K80399
Quantity
2
Position
Front Lower
Surface Finish
Chrome
Material
Steel
Warranty Period
2-Year
Part Number
RK80399,RK80400

Highlights

  • Vehicle Specific: PHILTOP Control Arms for Mariner 2005-2011, Tribute 2008-2011, Tribute 2005-2006, Escape 2004-2012 2.5L,.
  • Package Contents: 1x Part# Front Lower Left Control Arm + Pre-Assembled Ball Joint - K620373, 1x Part# Front Lower Right Control Arm + Pre-Assembled Ball Joint - K620374, 2x Part# Front Inner Tie Rods Ends Links - EV800820, 1x Part# Front Outer Left Tie Rod End Link - ES800575, 1x Part# Front Outer Right Tie Rod End Link - ES800574, 2x Part# Front Sway Bar Links - K750096.
  • Increased Stability: Suspension kits play an important role in the ride, enhancing suspension performance, stability and steering response. The entire kit is designed to provide a smoother, more reliable ride.
  • Superior Quality: Control arms are tested for impact, wear and fatigue to ensure product quality and durability.Our control arms are finely crafted, strong and durable.
  • Easy Installation: Control arms are designed and manufactured as direct replacements for genuine parts to ensure proper fit and calibration. No additional complex operations are required.

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year2005 - 20082009 - 20122009 - 201220082009 - 20102005 - 20062008 - 20112005 - 200620082009 - 2011200520082009 - 20112008 - 20112006 - 20072006 - 20082009 - 20112006 - 20072009 - 20102005 - 2011
MakeFordFordFordMazdaMazdaMazdaMazdaMazdaMazdaMazdaMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercuryMercury
ModelEscapeEscapeEscapeTributeTributeTributeTributeTributeTributeTributeMarinerMarinerMarinerMarinerMarinerMarinerMarinerMarinerMarinerMariner
TrimHybridHybridLimited HybridHybridHybridSSiiiBaseBaseBaseBaseConvenienceHybridHybridLuxuryPremierPremier
Engine2.3L L42.5L L42.5L L42.3L L42.5L L43.0L V63.0L V62.3L L42.3L L42.5L L42.3L L42.3L L42.5L L43.0L V62.3L L42.3L L42.5L L43.0L V62.5L L43.0L V6
Note--------------------

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

11

Reviews

4.8/5

Based on 5 reviews

580%
420%
30%
20%
10%

AutoMom_2019_383

02/24/2026

Great quality parts at a fair price. They feel really solid and have improved the handling on my Mariner considerably. Definitely a worthwhile upgrade.

Jennifer_Auto_157

12/09/2025

Fit my Escape perfectly and installation was a breeze. Plus, they got here super quick, way ahead of schedule. Couldn't be happier with the service.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.