PHILTOP Front Lower Suspension Kit Control Arms w/Ball Joint Compatible with Ford F-150 2004-2008 for Lincoln Mark LT 2004 2005

PHILTOP Front Lower Suspension Kit Control Arms w/Ball Joint Compatible with Ford F-150 2004-2008 for Lincoln Mark LT 2004 2005

Ball Joint Included

Corrosion Resistant

Deformation Resistant

4.7

Check if this fits your vehicle

Select a vehicle to check this product.

SKU:
7192OCA215AUS

Specifications

Brand
PHILTOP
Items Included
1x Front Right Lower Control Arm W/ Ball Joint (Passenger) - K80402 1x Front Left Lower Control Arm W/ Ball Joint (Driver) - K80403
Quantity
2
Position
Front Lower
Surface Finish
Polished
Material
Aluminum
Warranty Period
2-Year
OE Number
7L3Z3078C,7L3Z3079C,7L3Z3078D,7L3Z3079D,4L3Z3078CA,4L3Z3078BA,4L3Z3079BA,4L3Z3079CA
Part Number
RK80402,RK80403,TC6320,CK80403,GK80403,CB85193PR

Highlights

  • #53,017 in Automotive (See Top 100 in Automotive)
  • #107 in Automotive Replacement Control Arms
  • Fitment:PHILTOP Control Arms compatible with Ford F-150 2004 2005 2006 2007 2008, compatible with Lincoln Mark LT 2006 - 2008
  • Suspension Kit Includes: 1x Front Right Lower Control Arm w/ Ball Joint (Passenger) - K80402 1x Front Left Lower Control Arm w/ Ball Joint (Driver) - K80403
  • High Quality: Control Arms Lower Ball Joints Sway Bars Tie Rods Kit is polished and rust-proof.The anti-corrosion coating on the control arm can prolong the service life
  • Reinforced and Durable: Made of high-strength steel, precision forging and stamping, PHILTOP control arm can withstand the rigors of extreme road conditions. Whether it's rough mountain roads or city congestion, our control arms maintain consistent performance, reduce wear and tear, and extend service life
  • PHILTOP Support: Please recheck your vehicle compatibility (year/make/model) before purchasing the control arms suspension kit. You can use the "confirmedfit" frame above the title to check whether it is suitable for your model

Compatible Vehicles

Check if this fits your vehicle

Vehicle(s) Fit Information

Year20082007 - 200820042005 - 20082006 - 20082005 - 200820042005 - 200820082005 - 200820042005 - 2008200820082005 - 200820042005 - 200820042005 - 20082005 - 200820042005 - 200820042005 - 20082006 - 2008
MakeFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordFordLincoln
ModelF-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150F-150Mark LT
TrimFX2FX2FX4FX4Harley-Davidson EditionKing RanchLariatLariatLimitedSTXSTXSTXTHE 60TH ANNIVERSARY EDITIONTHE 60TH ANNIVERSARY EDITIONXLXLXLXLXLXLTXLTXLTXLTXLTBase
Engine4.6L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V85.4L V84.2L V64.6L V84.6L V84.6L V85.4L V84.2L V64.6L V84.6L V85.4L V85.4L V84.2L V64.6L V84.6L V85.4L V85.4L V85.4L V8
Note--
11th Digit of VIN is K N F
---
11th Digit of VIN is K N F
---
11th Digit of VIN is K N F
----
11th Digit of VIN is K N F
-
11th Digit of VIN is K N F
--
11th Digit of VIN is K N F
-
11th Digit of VIN is K N F
--

How to Install?

Installation Manual Download

User manual (PDF)
Download

Checks Before Installation

  • Confirm the installation side, mounting points and ball-joint configuration.
  • Inspect the new control arm, bushings, ball joint and dust boot for damage.
  • Check the steering linkage, stabilizer link and related suspension components for looseness or wear.
  • Support the vehicle with approved jack stands and support the steering knuckle to protect the brake hose and ABS wiring.
  • Replacing control arms in left/right pairs is recommended when both sides have similar mileage or wear.

Installation Steps

  • Step-1: Raise and support the vehicle, then remove the wheel.
  • Step-2: Support the steering knuckle and disconnect the stabilizer link or related components as required.
  • Step-3: Separate the ball joint using the correct puller—do not strike or pry it aggressively.
  • Step-4: Remove the mounting bolts and old control arm, then clean the mounting points.
  • Step-5: Position the new arm and hand-start all fasteners.
  • Step-6: Connect the ball joint and stabilizer link, replacing any single-use nuts or bolts.
  • Step-7: Return the suspension to normal ride height before tightening the control-arm pivot bolts to specification.

After Installation

  • Confirm all fasteners and locking components are secure.
  • Check that the wheel rotates freely without interference.
  • Perform a short, low-speed road test and check for noise, pulling or unstable steering.
  • A professional four-wheel alignment is required after installation.
  • Recheck the installation after the first 50–100 km.

Product Video

Product Description

改装款-PC11

Reviews

4.7/5

Based on 3 reviews

567%
433%
30%
20%
10%

Lisa_CivicDriver_623

02/05/2026

Got the parts in just two days, which was awesome. Everything was packaged well and installation went smoothly. Didn't run into any issues fitting them on.

CarGuy_John_15

04/14/2026

These control arms look and feel super heavy-duty. The ball joints are tight and smooth. For the price, the craftsmanship is top-notch. Really happy with this purchase for my F-150.

FAQS

Fitment depends on your car's year, model, and sometimes whether it is 2WD or 4WD. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm.

We stand behind our chassis components with a 3-Year Limited Warranty for your safety and peace of mind. Scroll to the "Warranty & Support" section at the bottom of the page for full details.

We offer both individual arms and complete suspension kits. Please check the "Package Includes" or "Quantity" section to see if you are ordering a single Driver/Passenger side arm or a full multi-piece kit.