Fitment:Front & Rear Complete Struts Coil Springs and Shock Absorbers for 2008-2010 Chrysler Town & Country 2008-2010 Dodge Grand Caravan
Struts/Shocks Features:OE standard,professional Multi-test,accurate fitment,directly replacement original shocks.High silicon content resists metal fatigue,stable and durability; Electro-coating,anti-corrosion and anti-oxidation.
Function:The strut assembly features chrome piston rods with OE brackets and mountings to prevent leakage. Its seamless sleeves guarantee smooth gliding, the steel coil spring brings high efficiency shock absorption,noise reduction, improved vehicle operational stability, vehicle wear reduction, more comfortable and safe driving experience.
When/Why to Replace Shocks:If the vehicle is experiencing problems such as ride quality reduction, poor handling,noisy,insufficient stability, replacing the shocks can quickly and effectively resolve these problems. Shocks failure will affect other parts of the vehicle and may even require replace the entire suspension system.Timely replace shocks can prevent these problems and save on maintenance costs.
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
D
david a baseydavid a basey
06/28/2026
Verified buyer
Highly impressed with the fast shipping and the package was opened but nothing fell out. Nothing damaged. Replace the worn out struts in my 20 13 Town & Country what a difference the ride quality is so much better no clunky noise just super smooth fairly easy to install.
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.
Add your vehicle to ensure fitment
Make
Model
Trim
Engine
Loading vehicle options...
Choose Year, Make, and Model to check exact fitment.
2008-2016 Chrysler Town & Country | Front and Rear Struts Shock Absorber 4-Pack | OE#68138247AB/171128L - PHILTOP
Front/Rear
Complete Strut Assembly & Shock Absorber Kit
SKU:
7380SAA20CRUS
5.0
$226.76$22676
Check if this fits your vehicle
Select a vehicle to check this product.
Items Included
1x Front Right Complete Strut Assembly - 171128R 1x Front Left Complete Strut Assembly - 171128L 2x Rear Shock Absorber - 37290
Fitment:Front & Rear Complete Struts Coil Springs and Shock Absorbers for 2008-2010 Chrysler Town & Country 2008-2010 Dodge Grand Caravan
Struts/Shocks Features:OE standard,professional Multi-test,accurate fitment,directly replacement original shocks.High silicon content resists metal fatigue,stable and durability; Electro-coating,anti-corrosion and anti-oxidation.
Function:The strut assembly features chrome piston rods with OE brackets and mountings to prevent leakage. Its seamless sleeves guarantee smooth gliding, the steel coil spring brings high efficiency shock absorption,noise reduction, improved vehicle operational stability, vehicle wear reduction, more comfortable and safe driving experience.
When/Why to Replace Shocks:If the vehicle is experiencing problems such as ride quality reduction, poor handling,noisy,insufficient stability, replacing the shocks can quickly and effectively resolve these problems. Shocks failure will affect other parts of the vehicle and may even require replace the entire suspension system.Timely replace shocks can prevent these problems and save on maintenance costs.
5.0
1 review
5 star: 1
Compatible Vehicles
Check if this fits your vehicle
Year
Make
Model
Trim
Engine
Notes
2014
Chrysler
Town & Country
30th Anniversary Edition
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Chrysler
Town & Country
LX
3.3L V6
w/o Self Leveling Suspension
2015 - 2016
Chrysler
Town & Country
LX
3.6L V6
w/o Self Leveling Suspension
2009 - 2010
Chrysler
Town & Country
LX
3.8L V6
w/o Self Leveling Suspension
2011 - 2016
Chrysler
Town & Country
Limited
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Chrysler
Town & Country
Limited
4.0L V6
w/o Self Leveling Suspension
2015 - 2016
Chrysler
Town & Country
Limited Platinum
3.6L V6
w/o Self Leveling Suspension
2013 - 2016
Chrysler
Town & Country
S
3.6L V6
w/o Self Leveling Suspension
2011 - 2016
Chrysler
Town & Country
Touring
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Chrysler
Town & Country
Touring
3.8L V6
w/o Self Leveling Suspension
2009 - 2010
Chrysler
Town & Country
Touring
4.0L V6
w/o Self Leveling Suspension
2011 - 2016
Chrysler
Town & Country
Touring L
3.6L V6
w/o Self Leveling Suspension
2010
Chrysler
Town & Country
Touring Plus
3.8L V6
w/o Self Leveling Suspension
2010
Chrysler
Town & Country
Touring Plus
4.0L V6
w/o Self Leveling Suspension
2010
Chrysler
Town & Country
Walter P. Chrysler Signature Series
3.8L V6
w/o Self Leveling Suspension
2014 - 2016
Dodge
Grand Caravan
American Value Package
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Dodge
Grand Caravan
C/V
3.3L V6
w/o Self Leveling Suspension
2011
Dodge
Grand Caravan
C/V
3.6L V6
w/o Self Leveling Suspension
2011 - 2013
Dodge
Grand Caravan
Crew
3.6L V6
w/o Self Leveling Suspension
2011
Dodge
Grand Caravan
Express
3.6L V6
w/o Self Leveling Suspension
2017 - 2019
Dodge
Grand Caravan
GT
3.6L V6
w/o Self Leveling Suspension
2011
Dodge
Grand Caravan
Mainstreet
3.6L V6
w/o Self Leveling Suspension
2011 - 2016
Dodge
Grand Caravan
R/T
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Dodge
Grand Caravan
SE
3.3L V6
w/o Self Leveling Suspension
2012 - 2019
Dodge
Grand Caravan
SE
3.6L V6
w/o Self Leveling Suspension
2014
Dodge
Grand Caravan
SE 30th Anniversary Edition
3.6L V6
w/o Self Leveling Suspension
2016 - 2018
Dodge
Grand Caravan
SE Plus
3.6L V6
w/o Self Leveling Suspension
2012 - 2019
Dodge
Grand Caravan
SXT
3.6L V6
w/o Self Leveling Suspension
2008 - 2010
Dodge
Grand Caravan
SXT
3.8L V6
w/o Self Leveling Suspension
2008 - 2010
Dodge
Grand Caravan
SXT
4.0L V6
w/o Self Leveling Suspension
2014
Dodge
Grand Caravan
SXT 30th Anniversary Edition
3.6L V6
w/o Self Leveling Suspension
Product Specifications
Brand
PHILTOP
Items Included
1x Front Right Complete Strut Assembly - 171128R 1x Front Left Complete Strut Assembly - 171128L 2x Rear Shock Absorber - 37290
Confirm the vehicle year, model, suspension type, installation position and part number before ordering.
For a complete strut assembly, replacing only individual accessories is not recommended. Mixing worn and new springs, mounts, bearings, dust boots or bump stops may cause noise, uneven ride height and repeated labor costs. Replace the complete assembly when these components are worn or damaged.
For balanced damping and handling, inspect both sides of the same axle and replace them as a pair when necessary.
Installation Steps
Step-1: Secure the Vehicle: Park on level ground, raise and support the vehicle with approved jack stands, then remove the wheel.
Step-2: Disconnect Related Components: Detach the stabilizer link, brake-hose bracket and ABS wiring as required. Support the steering knuckle to prevent pulling on hoses or wires.
Step-3: Remove the Old Unit: Remove the lower and upper mounting hardware, support the assembly and carefully remove it.
Step-4: Install the New Unit: Confirm the correct side and orientation, position the new assembly and hand-start all fasteners. If spring transfer is required, use a professional spring compressor. Never loosen the center nut with the spring under tension.
Step-5: Reconnect and Torque: Reinstall all brackets, links, hoses and wiring. Ensure nothing is twisted or stretched, then tighten all fasteners to the vehicle manufacturer’s specified torque. Do not grip or damage the polished piston rod.
Step-6: Reinstall and Align: Reinstall the wheel, lower the vehicle, complete the final torque check and perform a professional wheel alignment.
Product Description
Reviews
5.0/5
Based on 1 review
5
100%
4
0%
3
0%
2
0%
1
0%
Customer photos and videos
D
david a baseydavid a basey
Jun 28,2026
Verified buyer
Highly impressed with the fast shipping and the package was opened but nothing fell out. Nothing damaged. Replace the worn out struts in my 20 13 Town & Country what a difference the ride quality is so much better no clunky noise just super smooth fairly easy to install.
FAQS
Fitment depends on your car's year, model, and engine type. Please enter your vehicle's Brand, Year, and Model into the "Fitment Checker" at the top of the page to confirm a 100% match.
We stand behind our suspension quality with a 3-Year Limited Warranty against leaks and structural failure. Scroll to the "Warranty & Support" section at the bottom of the page for full details.
Yes, our Quick-Strut units include the strut, coil spring, strut mount, boot, and bumper pre-assembled. Review our product photos to see the fully integrated unit ready for bolt-on installation.